Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > application note

application note What are application notes? Search results

?
?
What are application notes?
Application notes refer to instuctions and recommendations from the vendor provided in addition to the normal reference manuals.
total search6467 articles
2002-03-01 Basic Stamp I application notes: LCD user-interface terminal
This application note presents a program in PBASIC that enables the BASIC Stamp to operate as a simple user-interface terminal.
2002-03-01 Basic Stamp I application notes: Infrared communication
This application note shows how to build a simple and inexpensive infrared communication interface for the BASIC Stamp.
2002-03-08 Basic Stamp I application notes: Controlling and testing servos
This application note presents a program in PBASIC that enables the Basic Stamp to control pulse-width proportional servos and measure the pulse width of other servo drivers.
2002-03-08 Basic Stamp I application note: Using PWM for analog output
This application note explains how to convert digital signals to analog voltages using the Basic Stamp PWM.
2002-03-08 Basic Stamp I application note: Sonar range finding
This application note presents a circuit that allows the BASIC Stamp to measure distances from 1 foot to 12 feet using inexpensive ultrasonic transducers and commonly available parts.
2002-03-08 Basic Stamp I application note: Practical pulse measurements
This application note explores several applications for the Basic Stamp's unique pulsin command, which measures the duration of incoming positive or negative pulses in 105s units.
2002-03-08 Basic Stamp I application note: A serial stepper controller
This application note demonstrates simple hardware and software techniques for driving and controlling common four-coil stepper motors.
2004-05-28 AWE bandwidth management application note
This app note shows how to configure an AWE/Ultima3 network with multiple levels of service
2000-09-05 ATF1500AS product family conversion application note
This application note acts as a guide in converting the programming output file from comparable industry-standard CPLDs to the Atmel programming file without any functionality or performance loss.
2004-12-02 AT86RF401 bit timer application note
This app note provides a comprehensive explanation of how the bit timer functions
2008-06-30 Application review and comparative evaluation of low-side gate driver
Fairchild Semiconductor's application note 6069 by Mark Dennis provides details of MOSFET switching action in applications with clamped inductive load, when used as a secondary synchronous rectifier, and driving pulse drive transformers.
2000-11-29 Application of zero delay buffers in switched Ethernet
This application note demonstrates how Pericom's family of low-skew Zero Delay Clock Drivers, including the PI6C5932, PI6C9910, PI6C9930, PI6C2501, PI6C2509A, PI6C2510A and PI6C2308A, is used to de-skew the delay in networking applications, such as switched Ethernet.
2001-06-08 Application of Xicor digitally-controlled potentiometers (XDCP) as Hybrid Analog/Digital
This application note discusses how to implement Xicor's digitally controlled potentiometers in hybrid analog/digital feedback system control.
2008-12-08 Application of wide-band buffer amplifiers
The LH002, LH003 and LH0063 are wide-band, high current, unity gain buffer amplifiers intended for use alone or in closed-loop combination with op amps to drive co-axial cables and capacitive or other high-current loads.
2002-11-26 Application of the UBA1702/A line interrupter driver and ringer circuit
This application note is intended to provide application support for designing telephone sets with the UBA1702/A IC.
2002-11-20 Application of the TES1112 and TEA112A transmission circuits
This application note provides application support for designing electronic telephone sets with the TEA1112 and TEA1112A bipolar transmission ICs.
2001-04-06 Application of the SA9500/SA9502 dual-band CDMA/AMPS downconverter
This application note explains how Philips Semiconductors' SA9500/SA9502 front-end receive downconverter ICs can be used in CDMA/AMPS telephone systems.
2003-08-15 Application of the MT8843 Calling Number Identification Circuit 2
This application note describes the MT8843's functions, its compatibility with telecom standards and provides some application circuit examples.
2000-12-13 Application of the MC1374 TV modulator
This application note presents the MC1374 TV modulator chip as a suitable device for applications where separate audio and composite video signals need to be converted to a high-quality VHF TV signal.
2013-08-29 Application of Qorivva Boot Assist Module
Learn about the Boot Assist Module, an alternative to custom boot loader software.
2002-04-22 Application of analog & mixed signal simulation techniques to the synthesis and sequencing of diagnostic tests
This application note addresses the issues of simulation convergence, component fault models, circuit model implementation, simulation run times and test strategy accuracy and describes some fault definition and simulation activities.
2001-08-21 Application notes for fingerprint processing using the A336FP Fingerprint and Image compression DSP Chip
This application note describes the use of the A336FP DSP chip for fingerprint processing and image compression applications
2002-05-14 Application note for WDT/RTCC prescaler
This application note briefly describes the WDT/RTCC prescaler system and its system application.
2002-05-13 Application note for the PED function of MDT2005/2010/2020
This application note describes the process of enabling PED to function for various apps.
2003-09-19 Application Note for RFS1006 Evaluation Board
This application note provides users of the RFS1006 GaAs MESFET power amplifier with a board layout diagram that indicates the voltage, ground and RF connectors for proper connection.
2003-09-19 Application Note for RFS1003 Evaluation Board
This application note provides users of the RFS1003 GaAs MESFET power amplifier with a board layout diagram that indicates the voltage, ground and RF connectors for proper connection.
2003-05-28 Application Note CAV414-AM402
This application note outlines the use of an evaluation board that allows tests of the CAV414 in conjunction with the AM402 in different configurations with different capacitive sensors.
2003-05-28 Application Note CAV414
This application note provides the necessary formulas to calculate the CAV414 with the sensing element.
2003-05-28 Application Note CAN404
This application note provides the necessary formulas to calculate an oscillator system with a CAN404 IC.
2003-05-27 Application Note - NetLink
This application note offers guidelines for standardized remote control and monitoring of Rohde & Schwarz transmitters using NetLink.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top