Stay in touch with EE Times Asia

EE Times-Asia > Advanced Search > Attenuator

Attenuator Search results

Article
(155)
Forum
(0)
Blog
(0)

total search155 articles

2002-08-29	Vicor ripple attenuator allows up to >40dB noise The MicroRAM Output Ripple Attenuation Module can be used with any dc output power supply that delivers 3Vdc to 30Vdc output and provides >40dB conducted differential noise attenuation from 60Hz to 1MHz.
2002-06-26	TDK LIUs integrate programmable jitter attenuator TDK Semiconductor Corp.'s family of single-chip, multichannel DS3/E3/STS-1 LIUs integrates a programmable jitter attenuator that enables the devices to meet E3/T3 jitter standards.
2007-12-20	RF power terminator, attenuator suit high-frequency apps TT electronics IRC advanced film division has released a high power attenuator and surface mount transmission line terminator targeted for RF and microwave applications.
2011-01-10	R&S signal generator now with electronic step attenuator R&S SMB100A expands range up to 12.75GHz for blocking tests. R&S SMB B112 option enables the R&S SMB100A with a wear-free electronic step attenuator.
2005-08-24	New attenuator from M/A-COM M/A-COM, a business unit of Tyco Electronics, announced a new RoHS-compliant 6bit serial controlled attenuator designed for applications where high accuracy, monotonic performance and low cost are required.
2002-03-25	MegaSense optical attenuator targets =U apps The company's MEMS-based variable optical attenuator measures 7.6-by-15.5-by-6.5mm, making it suitable to perform amplification, pre-emphasis, and equalization on low-profile =U applications.
2005-10-13	M/A-COM attenuator bundles high accuracy with low cost M/A-COM, a business unit of Tyco Electronics, recently unveiled a RoHS-compliant 5bit serial controlled attenuator targeted at applications that require high accuracy and monotonic performance at a low cost.
2002-08-13	Lightconnect attenuator suits receiver protection apps Lightconnect Inc. has announced the shipment of the FVOA Series 4000, a MEMS-based device suited for receiver protection or as a safety switch during transmitter turn-up.
2006-07-07	Jitter attenuator delivers ultralow jitter Valpey Fisher has launched the VFJA100 jitter attenuator said to be capable of providing up to 1GHz of output frequency with ultralow jitter.
2000-06-13	Integrated, Single-Step, 10dB Attenuator for Power Control Applications This technical note examines the RF2421 single-step 10dB attenuator that enables radio designers to enhance system performance by appropriately setting RF signal levels through their systems.
2006-09-22	IDT jitter attenuator supports PCIe Integrated Device Technology Inc. (IDT) has announced the introduction of a jitter attenuator (ICS874003AG-02) optimized for the Xilinx Virtex-4 family of FPGAs.
2015-10-05	IDT debuts jitter attenuator, frequency synthesisers The 8V19N407 and 8V19N408 support up to 3GHz output, as well as 82fs of RMS phase noise, addressing the requirements of multi-carrier GSM radio transceivers as well as 40Gb and 100Gb Ethernet PHYs.
2006-06-05	Headphone attenuator includes microphone monitor This headphone attenuator/amplifier with microphone monitor allows easy conversation while wearing ear buds.
2009-10-07	Digital step attenuator touts 26ns switching times Peregrine Semiconductor Corp. has released the PE43204 2bit UltraCMOS digital step attenuator (DSA) suitable for 4G Tx/Rx applications.
2003-03-24	CNEIES fiber-optic attenuator suits CATV filter apps The CEIECSXD4-004 fiber-optic attenuators from China National Electronics Import & Export Shaanxi Co. Ltd operate up to a frequency of 1GHz.
2010-06-01	Closed-loop control circuit implementation of the ADuC832 MicroConverter IC and the AD8305 logarithmic converter in a digital variable optical attenuator This application note focuses on the control circuitry, using the ADuC832 MicroConverter IC and the AD8305 logarithmic converter, for a MEMS-based, silicon, optical wave-guide, digitally controlled variable optical attenuator (DVOA).
2014-09-17	Clock multiplier, jitter attenuator ICs target comms apps The ZL30252 and ZL30253 from Microsemi give communication equipment customers a timing solution that meets industry-leading jitter performance imposed by the latest 100Gb/s PHY devices.
2015-09-10	Clock jitter attenuator boosts JESD204B serial interface The HMC7044 offers a wide range of clock management and distribution features that make it possible for designers of base stations to build an entire clock design with a single device.
2001-06-19	CATV reverse amp with step attenuator This application note explains the thermal and RF layout considerations for ANADIGICS' ARA05050 CATV reverse power amplifier.
2009-07-16	Attenuator suits broadband system apps Avago Technologies has announced a new fully matched wideband variable attenuator module for use in a wide range of broadband system applications.
2002-01-23	Agilent attenuator, modular switch reduce time to market for next-gen devices The 8157xA attenuators and 8159xA modular optical switch allow manufacturers and integrators of optical amplifiers to reduce the costs of tests and enable characterization of next-generation devices.
2001-04-19	A wideband general purpose PIN diode attenuator This application note describes the design of a high-performance, PIN-based, four-diode PI attenuator utilizing Alpha's low-cost SMP1307-011 diode in a plastic SOD-323 package.
2002-09-20	A wideband general purpose pin diode attenuator This application note describes the design and performance of a PI attenuator that uses 4 PIN diodes.
2013-09-16	6bit digital step attenuator supports 4-14GHz The CHT4016-QEG provides an attenuation range of 31.5dB in 0.5dB steps and targets applications ranging from military to commercial communication systems.
2002-10-24	6-bit 63dB RF digital attenuator solution This application note describes Alpha's low-cost 6-bit 63dB RF digital attenuator and how it has solved the difficult problem in attaining the full 63dB in a single package using two individual low-cost, plastic packaged GaAs ICs.
2001-04-19	6-bit 63dB IF digital attenuator solution 1-500MHz This application note describes a 6-bit, 63dB IF digital attenuator design that utilizes Alpha's AD260-85 and AA104-73 plastic-packaged GaAs ICs.
2002-05-07	Vicor filter module meets harmonic current, EMI specs The ENMods filter module from Vicor Corp. combines the MiniHAM passive harmonic current attenuation module and the FARM3 ac/dc front-end module, as well as additional filtering and holdup component to provide full compliance to EN harmonic current and EMI standards.
2002-06-20	Variable optical attenuators combined with an arrayed waveguide grating filter for next-generation WDM system This application note describes the combination of variable optical attenuators with an arrayed waveguide grating filter for next-generation WDM systems.
2002-08-08	Thin-film chip attenuators feature various termination styles State of the Art Inc. has enhanced and expanded its line of thin-film chip attenuators.
2007-09-17	Switch drivers simplify design validation Agilent Technologies Inc. has released attenuator/switch drivers designed for both bench-top and ATE environments.