Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > common-mode rejection

common-mode rejection Search results

?
?
total search136 articles
2012-04-18 Survival guide to high-speed ADC digital outputs
Learn about the key attributes of CMOS, LVDS, and CML outputs, and their performance tradeoffs.
2004-03-19 Sipex line driver offers up to 60Mbps data rate
The quad channel RS422 line driver and quad channel receiver from Sipex provide pin-out compatible with the industry standard 26C31 and 26C32 footprint.
2011-11-01 Signal chain basics: Analyzing RL drive in ECG front end with SPICE
Learn about the analog front end for this ubiquitous, vital medical instrument.
2005-06-21 Sensors tout several improvements
Allegro MicroSystems added three new gear-tooth sensors to its line of AC-coupled Hall-effect devices that offer a smaller package size and an integrated filter capacitor to provide additional reliability.
2015-11-17 Reduce redesign risk with correct ADC analogue input
There are some choices that need to be made when deciding which converter is to be used for a particular application. Here we will explore the different available analogue input types.
2007-01-31 Quadrature modulator enables high-performance GSM base stations
A new high-performance quadrature modulator from Linear Technology is optimized for 850MHz to 965MHz GSM, CDMA2000, ISM and RFID modulator applications.
2006-05-16 Protection devices offer low capacitance for HDMI-enabled products
Semtech launched a four-line protection device with the low capacitance and high protection levels
2008-02-11 Protection device tailored for DisplayPort
Semtech has introduced the RClamp 0524J, a 5V protection device for DisplayPort and other high-speed interface applications.
2007-09-04 Precision op amp eases portable designs
Texas Instruments Inc. has rolled out the what it claims to be the industry's lowest power zero-crossover operational amplifier.
2015-07-14 PLC teardown: Allen-Bradley Micro850 for industrial apps
The PLC is symbolic of the high level of ruggedness configurability, isolation performance and ease of use that keeps PLCs strong in factory automation despite the encroachment of embedded computing.
2013-09-24 Passive stylus for large capacitive touchscreens
Know the challenges for passive stylus developers to meet the performance requirements for using capacitive sensing technology on larger touchscreens.
2006-07-21 Optocoupler targets Ethernet switch boxes
Avago Technologies targets developers of Ethernet switch boxes used in industrial and office networks with its high-speed, low-power digital optocoupler.
2014-04-04 Optimisation of photodiode sensor circuit design
Know the important steps in obtaining the best possible system performance.
2007-01-26 Op amps claim near-zero drift and input noise
Noise level of ADI's AD8231 op amps is 32nV/rt-Hz, which the company documents as being just 1/5 the value of competing "zero-drift" instrumentation amplifiers.
2006-08-17 National unveils 'smallest' Boomer Class AB amps
National Semiconductor has introduced two Boomer Class AB amplifiers in a 0.4mm-pitch package, said to be the world's smallest micro SMD package.
2005-01-12 National navigates upstream into precision op amps
National will announce a series of operational amplifiers in a bid to position itself more completely within the precision-amp market.
2006-05-23 Modulator directly converts from baseband to 900MHz
A quadrature modulator from Linear Tech is designed for direct conversion from baseband to the 850-965MHz frequency band.
2006-11-06 Low-capacitance protection devices support HDMI 1.3
Semtech claims its two new 5V protection devices are the first solid-state devices to reach 0.3pF in capacitance to meet the needs of HDMI 1.3 and other high-speed data lines.
2005-06-24 Linear Tech ADCs provide zero average differential input current
Linear Technology Corp.'s new series of delta-sigma analog-to-digital converters features a novel front-end design that is able to directly digitize a wide range of sensors
2002-08-13 Linear Tech ADC features variable resolution modes
Targeting precision industrial measurement applications, Linear Technology Corp. has released a 24-bit, no-latency delta-sigma ADC based on a patented variable-speed/resolution architecture.
2005-08-31 JFET in-amp housed in MSOP
Analog Devices' AD8220 JFET input instrumentation amplifier touts a 50 percent reduction in package size and improved performance, while reducing cost and power consumption
2009-04-29 Instrumentation amp is smaller than pencil's tip
Analog Devices Inc. has introduced what it claims to be the smallest and lowest power instrumentation amplifier (in-amp).
2010-04-16 Instrumentation amp comes with on-chip diagnostics
National Semiconductor Corp. has launched the LMP8358 zero-drift, programmable instrumentation amplifier with on-chip diagnostics.
2006-05-01 In-amp specifies differential output
Today's instrumentation amplifiers face a daunting task: providing differential-drive output to the next stage in the signal chain, typically an ADC.
2014-06-20 Guide to measuring PDN on a budget
While there are many excellent instruments for measuring power distribution network, we do not all have a budget that can support such an expense. However, there are other options available.
2008-12-09 FAQs: Amplifiers (Part 1)
Part 1 tackles questions like what are the advantages of the BiCMOS process? What is Output High Voltage (VOH) for a comparator? What is a Programmable Gain Buffer?
2008-07-11 Fairchilld touts optcoupler with highest noise immunity
Fairchild Semiconductor offers designers an optocoupler solution that the company claims delivers a fast and robust isolation interface to ensure low transmission error rates and reliability for noisy industrial setups
2014-09-02 Enable low-cost isoSPI coupling for battery systems
By using an AC-coupling method, we can eliminate the double insulation requirement, and therefore mitigate the cost impact of high voltage isoSPI systems.
2012-02-28 Employ optocouplers to protect battery system from transients, shorts
Optical isolators are the defacto standard for providing high electrical isolation and noise immunity, while consuming less power than transformer coupling isolation.
2006-03-30 EMI filters offer surge suppression
Foster Transformer offers EMI filters with optional surge suppression.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top