Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > connector system

connector system Search results

total search855 articles
2005-01-28 USB connector gets more power
FCI's new USB+Power connector system combine standard USB contacts with additional power contacts to address applications where power requirements exceed the capabilities of standard USB.
2006-07-06 Tyco expands PV connection system offering
Tyco Electronics has expanded its Solarlok photovoltaic connector system with three new junction box configurations and positive latching.
2006-03-07 Slim connector provides dual capability
Designed for panel applications, the Slim I/O cable connector from Tyco Electronics provides power and/or signal I/O capability for short and long-reach cable
2002-11-25 Shielded connector handles 10Gbps transmission
The MicroSpeed shielded connector system features SMT termination for differential- or single-ended high-speed signal transmissions in telecommunications and datacom applications with data rates of up to 10Gbps.
2007-01-11 Samtec adds new options to connector systems
Samtec has added new options to its Q2 second-generation high-speed connector system: integrated power pins, RF connectors and retention pins for increased unmating force.
2006-10-26 Q2 connector system adds Retention Pin option
Samtec has added to the features of its Q2 second-generation, high-speed connector system a standard Retention Pin option that can as much as double the unmating forces in typical applications up to 100 cycles.
2006-03-17 Power distribution system is easily customized
Methode Network Bus Products and Cableco Technologies have developed the PowerRail pluggable rail power distribution system
2008-12-01 Power connectors boost system airflow
Connector makers are developing new power connector designs--they now consider frontal density, comprised not just of the connector but of the space on the power supply the connector takes up
2004-05-28 New AirMax VS connector addresses cost issues
FCI's new AirMax VS high-speed shieldless connector addresses cost reduction by expanding routing options and reducing backplane and daughtercard layers
2011-06-01 Multifunction connector supports LED apps
Hirose has developed a compact 2mm pitch, multifunctional connector system that provides wire-to-board, board-to-board joint and short-circuit sockets.
2002-01-04 Molex SFP connector system supports 2Gbps data rates
The company's high-speed, high-density small form-factor pluggable (SFP) connector and cages are employed to interface copper or fiber-optic pluggable transceivers and cable assemblies to host equipment
2013-06-12 Molex rolls out 10 port RF DIN modular backplane system
The RF DIN 1.0/2.3 Modular Backplane System features a unique bracket housing design, which enables an expansion capability of up to 10 ports for increased orthogonal PCB mating flexibility
2004-07-12 Molex delivers high-speed connector system for backplane
Molex's new GbX connector system delivers speeds from 6Gbps to 10Gbps while providing high-density with up to 69 real differential pairs per linear inch.
2014-10-27 Molex connector system targets LED lighting modules
The push-button style Lite-Trap SMT wire-to-board connector system has a profile height of 4.20mm and claims to offer one of the lowest profiles and wire insertion forces available on the market.
2003-10-08 Molex connector system features LFH contacts
The DMS-59 connector system from Molex achieves a reliable connection for dual monitor systems.
2002-12-10 Molex connector enables blind-mating
The Micro-Fit 3.0 BMI connector system from Molex Inc. handles up to 5A of power and is designed for blind mate applications in PC and backplane systems.
2008-11-13 Miniature cable connector suits high-reliability apps
ERNI Electronics has released a single-row 1.27mm pitch MiniBridge cable to board connector system designed for high-current, high-reliability and space-saving products.
2003-10-27 MEG-Array connector system
This application note covers the recommended application of the MEG-Array Connector system and is intended to provide general guidance for process development.
2013-08-01 Industrial sealed connector system ready for harsh elements
The MX150L connectors from Molex support low-level signal applications as well as power applications up to 40.0A and are based on the 1.50 and 2.50mm blade-type terminals.
2005-07-26 I/O connector suits portable apps
AVX released its new standard 9257 series I/O connector system that is designed specifically to meet the space constraints of portable electronic equipment.
2013-04-02 HSAutoLink II interconnect system ready for 2.0Gbit/s
Molex's latest interconnect system supports USB 2.0, USB 3.0, LVDS, Ethernet AVB (Audio Visual Bridging), and modified HDMI, DVI and DisplayPort
2008-04-29 High-density connector delivers high signal density
Tyco Electronics has introduced the Z-PACK Slim UHD connector series that is designed to support the increasing demands for higher signal density in small system slot pitches.
2006-10-16 FCI touts 'first' 2mm connector with 0.1mm coplanarity
FCI said it is the first to develop a 2mm pitch modular connector system with 0.1mm coplanarity for all surface-mount parts.
2003-09-15 FCI releases shieldless high-speed connector
The AirMax VS connector system from FCI Communications is suitable for use in the design of high speed computing and network systems.
2004-10-13 FCI I/O connector system simplifies PCB assembly
The Densi-Shield I/O connector system from FCI offers 8 pair connectors, which provide a reduced side-by-side pitch of 12.5mm.
2003-10-08 FCI high-speed connector operates to 6.25Gbps
FCI Communications has announced its AirMax VS connector system that is suitable for use in the design of high speed computing and network systems, from 2.5Gbps to 6.25Gbps with built-in scalability to >12Gbps.
2002-02-28 FCI board-to-board connector system rolls
FCI Electronics has expanded its BGA, high-speed MEG-Array board-to-board connector system to include an 81-position version.
2002-07-01 ERNI ships evaluation kits for high-speed connector system
ERNI Elektroapparate GmbH has announced the release evaluation kits for the Ermet ZD advanced differential pair connector system.
2007-10-26 ERNI completes ERmetZD connector line
ERNI Electronics has added new right-angled female connectors in 2, 3 and 4 contact pair versions to complement its ERmetZD range of straight male connectors and right-angled female connectors.
2002-08-09 ERNI backplane connector address 5Gbps apps
ERNI has released the ERmet ZD board to backplane electrical connector system that provides a differential solution for applications in the range of 3Gbps to 5Gbps.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

Back to Top