Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > copper cable

copper cable Search results

?
?
total search244 articles
2005-06-24 Foundry rolls layer 2/3 switches
Foundry Networks' FastIron Edge X424F (FES X424F) device is a compact, layer 2/3 edge switch that supports 24 small form factor hot-pluggable ports and options for one or two ports of 10GbE.
2014-10-21 Ethernet Alliance meeting highlights emerging standards
The consensus meeting made clear that one or more 50G standards are needed, the debate over a 50G versus 100G serial lambda standard for optical nets is unresolved and the 2.5G/5G push looks promising.
2007-10-01 Ericsson goes beyond wireless
LM Ericsson's chief marketing officer, Johan Bergendahl, discusses the company's efforts to expand its wireless operator roots into a multi-environment approach to communications.
2015-01-19 Enhanced SMT pad design for signal transmission
In this article, we present an analysis that proves that insertion of a cut-out on the reference plane underneath the SMT pads reduces the impedance mismatch and increases the bandwidth of the transmission line.
2014-09-02 Enable low-cost isoSPI coupling for battery systems
By using an AC-coupling method, we can eliminate the double insulation requirement, and therefore mitigate the cost impact of high voltage isoSPI systems.
2013-02-19 Employing MOST for driver assistance
Know how MOST can provide an overall optimal system solution meeting the requirements of infotainment and driver assistance as they grow together and face higher bandwidth needs.
2015-07-15 E-band cost, reliability concerns in MMIC packaging
Traditional semiconductor packaging approaches either cost too much or suffer from signal integrity issues. However, new techniques are becoming available that can address these problems.
2001-03-01 DSPs: Key to broadband's future
While DSP technology is integral to the new broadband appliances, it is also playing a central role in the broadband access technologies such as DSL that will deliver high bandwidth to these appliances.
2008-05-12 DSLAM enables operators to cut carbon footprint
ZTE has claimed that its Broadband Universal Access System could help operators make a major impact on their carbon footprint as well as save millions of dollars a year in power costs.
2006-04-03 Digital MEMS mic put on single chip
Microelectromechanical systems are the best possible successor to analog electret technologies; but so far, analog MEMS microphones have been largely relegated to a single market: hearing aids.
2008-08-01 Developing a green product development strategy
One of the most difficult steps in the initiation of a green product development strategy is where to get started. The green knowledge base for product development is widely distributed and not readily available within the organization, in the design or process teams.
2014-01-22 Develop sense electrodes for 3D touchpad surfaces
Know the most important design choices that need to be made when designing a touchpad for a 3D surface.
2006-05-30 Cylindrical connectors are RoHS compliant
Amphenol Industrial Operations has released the RoHS-compliant version of its PT series miniature cylindrical connectors suitable for environmental sealing or pressurized applications.
2012-12-05 Cortina unveils 28nm EDC PHY architecture
The CS4343 from Cortina claims to drive dramatically lower power and support higher bandwidth to scale to 100G and 400G applications.
2005-11-02 Contacts target hi-rel interface apps
Samtec's Tiger Eye contacts are heat-treated to optimize spring properties for maximum cycles in high-reliability applications.
2006-10-12 Consortium takes on next phase of DSL tech
A group of industrialists and academics led by Israeli broadband equipment provider ECI Telecom have formed a consortium to spearhead the next phase of DSL technology.
2007-09-17 Connectors cope with medical apps' requirements
Despite the lack of standardized testing today for electronic components used in medical products, manufacturers are delivering connectors that meet the most demanding requirements of the medical industry.
2006-03-21 Connectors allow quick mating, unmating
Amphenol Industrial Operations has introduced a new series of push-pull aluminum shell connectors that allow quick mating and unmating.
2013-11-28 Building better barriers through flawless moisture detection
Developed by the Energy Department's National Renewable Energy Laboratory, the NREL Electric Calcium Test (e-Ca) uses unique design elements to measure corrosion from water using calcium.
2005-09-08 Building an end-to-end architecture that supports fixed mobile convergence
Fixed Mobile Convergence is receiving significant attention from the research community and telecom equipment vendors around the world. Is there an end-to-end architecture that will support FMC?
2006-10-27 Belden rolls out new industrial Ethernet cables
Belden has expanded its line of DataTuff Industrial Ethernet cables with the addition of three enhanced 4-pair, Category 5e twisted pair cables.
2011-03-14 Avago fiber optic devices solve interconnect challenges
Avago expands its portfolio of 10Gb to 120Gb fiber optics solutions with embedded parallel modules and industry-standard pluggable modules to handle interconnect bandwidth challenges.
2006-05-22 Asia gears up for fiber-based broadband tech
To meet the rapidly growing demand for triple play access, the broadband industry is looking at PON as the next logical step, and major industry player PMC-Sierra is taking the ballgame to Asia.
2011-03-01 Apple picks Thunderbolt I/O for new MacBook
Apple has opted to use Intel's Thunderbolt interface in its new MacBook Pro notebooks, claiming it is a revolutionary I/O technology that can support every important I/O standard.
2012-06-06 An Asian view of the evolution of fixed line broadband
As speeds in fixed broadband services grow, the need for products that can keep up with the increasing speeds are also on the rise.
2014-02-17 Altium adds support for Rosenberger connectors
Altium expands support for its range of PCB component libraries, which now covers Rosenberger connectors.
2004-06-29 Agilent connectorless logic analyzer adopted as standard
Agilent announced that its Pro Series soft touch connectorless logic analyzer probe interface has been adopted by logic analyzer vendors as the industry standard.
2003-08-27 Agere acquires physical-layer specialist
Agere Systems Inc. has acquired Massana Ltd, an Irish physical-layer Ethernet specialist which had shifted from DSP cores for Digital Subscriber Lines, to devices for physical-layer Gigabit Ethernet functions.
2006-01-19 Adoption of 10Gbps cabling systems seen in five years, says Systimax
The need for higher-end cabling solutions continues to drive product and technology development for network technology providers.
2016-03-17 Achieve picosecond precision with FPGA techniques
When dealing with digital converters implemented on FPGA, you need to take important features into consideration to reach picosecond precision.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top