Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > crosstalk

crosstalk Search results

?
?
total search467 articles
2006-04-03 ZIF connectors increase reliability, decrease crosstalk
ITT Cannon's DLP series of Zero Insertion Force (ZIF) connectors are said to provide greater contact reliability and reduced signal crosstalk.
2007-11-16 Use time-domain methods to measure crosstalk
This article discusses the elements of crosstalk, and demonstrates how you can measure crosstalk on a single-layer PCB using an oscilloscope or a signal analyzer.
2002-02-07 Teradyne GbX connector features <2 percent crosstalk
Featuring a high density level and <2 percent crosstalk, the GbX connector offers an upgrade path beyond existing 2mm platforms, and provides ease of routing and reduced capacitance for 10Gbps Ethernet interconnect.
2004-04-30 Synopsys keynoter cites crosstalk, power challenges
Crosstalk and power are extremely difficult problems to solve, and will require significant changes to the existing chip design flow, according to Li-Pen Yuan, R&D director for extraction and signal integrity at Synopsys.
2008-11-19 Solution of Crosstalk in TFT
Crosstalk in general is a visual defect that causes contrast difference in some areas of display which display the same grayscale. It occurs because of the interference caused by adjacent pixels.
2000-05-04 Single 4-input IC gives over 90dB crosstalk rejection at 10MHz and is expandable
This application note describes the LT1204 four-input video multiplexer IC as it speeds the design of high-performance video selection products.
2009-11-10 Revised crosstalk-aware routing offers better optimized design
Here's a proposed method for prudent crosstalk fixing.
2005-05-31 MUX 'significantly improves crosstalk-induced jitter performance
The SY89859U from Micrel is a low jitter, low-power, high-speed 8:1 multiplexer (MUX) with a 1:2 differential fanout buffer optimized for precision telecom and enterprise server distribution apps
2000-04-08 Measuring crosstalk in LVDS systems
This application note describes the effects of crosstalk on high-speed digital signals. It also shows that crosstalk can be defined by enabling/disabling adjacent LVDS (Low Voltage Digital Signaling) channels while measuring jitter at various points along the signal path.
2006-02-16 High accuracy modeling for crosstalk noise analysis
This article describes the composite current source noise model for accurate noise analysis.
2009-10-01 HD 3D PDP packs crosstalk reduction
Panasonic unveils a full HD 3D PDP and high-precision active shutter glasses for 3D TV in the living room.
2004-10-11 FSA panel debates crosstalk doom
Panelists at the Fabless Semiconductor Association Design Modeling Workshop debated the pressing issue of whether crosstalk is killing the semiconductor industry.
2000-05-01 Electrical thresholds for identifying crosstalk aggressor nets
Design engineers must identify crosstalk aggressors to reduce crosstalk to acceptable levels. The challenge is to identify all nets that are significantly coupled through crosstalk prior to actual simulation.
2002-01-11 Dongguan Stone coaxial cables provide minimal crosstalk
The ST-4 coaxial cables offer low loss and low propagation delay, enabling minimal crosstalk. They are designed primarily for PC and gaming applications.
2012-02-02 DEF: The best bet to fight crosstalk
While there is no fail safe solution for measuring the effects of cross talk on a chip, the best existing solution is decision feedback equalizer, a type of circuit that can be inserted into a design to minimize crosstalk.
2002-04-04 Crosstalk stays as chip material work slows
Silicon vendors are holding back from using materials in 0.135m chips that supposedly promise to unlock the full speed available from the smaller transistors at that technology node.
2008-06-26 Crosstalk measurement, extraction and validation in 10Gbps serial systems
This paper provides a process to extract accurate connector crosstalk models. The Molex
2016-01-22 Crosstalk analysis application for real-time oscilloscopes
Keysight said the N8833A and N8833B not only detects and quantifies the presence of crosstalk, but it can determine which aggressors are primarily responsible.
2005-09-16 Connector with crosstalk
Teradyne recently launched its GbX E-series connector that is optimized for differential architectures, and features crosstalk as low as 2 percent.
2002-08-26 BivarOpto quad light pipe eliminates crosstalk
BivarOpto's LP4 Quad-Level Light Pipe series features a narrow profile, four-tier light pipe assembly design that is claimed to eliminate crosstalk between indicator stations.
2003-10-23 Aoba bead inductors minimize crosstalk
The FBM N series (0603, 0805, 1206 ) of ferrite chip bead inductors from Aoba Technology features a closed circuit formed by internal silver printed layers.
2011-12-28 Analyzing jitter, timing in the presence of crosstalk
Here's a new approach to jitter separation in the presence of crosstalk, a growing problem as the number of lanes increases to boost computing system throughput.
2005-03-16 ADCs provide -110dB crosstalk
A family of low power, high speed dual ADCs that provide -110dB crosstalk for excellent channel-to-channel isolation, while achieving low power consumption was announced by Linear Tech.
2001-08-16 The ramifications of component selection
Need to know what is the most important electrical specification for a connector or IC package? This article looks at what is generally the hardest problem in component selection.
2012-02-07 T&M execs on the hot seat
Although the panelists were criticized that they were not doing enough to address the customers' toughest challenges, everyone agreed that test engineering increasingly involves multidiciplinary skills.
1999-12-20 Switching analog signals with QuickSwitch devices
QuickSwitch devices from Quality Semiconductor, is originally designed for high-performance digital bus applications and can be used in small-signal analog applications. This application note is a discussion of crosstalk, off-isolation, and insertion loss, parameters critical to the performance of analog systems.
2004-06-16 Simulators shred the limits of mixed-signal design
Under pressure from 90nm processes and rising clock frequencies, analog/digital SoC tools have stepped up to meet engineers' needs.
2004-09-16 Signal integrity key for gigabit interconnects
Interconnect performance becomes the key factor in reliable system operation as digital designs push to the gigabit ranges.
2005-09-16 Shifting to photonic clocking
The transition to optical clocking is a 'when,' not 'if' situation that demands a low-cost photonic solution.
2015-11-03 Optimising equalisation for FFE, CTLE, DFE
Know the significance of balancing cost and power against CTLE/Tx FFE and the number of DFE taps in a way that reduces ISI without amplifying crosstalk.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top