What is an RF signal generator?
A device that generates repeating RF signals and used in testing and repairing electronic devices. |
- Article
(56) -
Forum
(0) -
Blog
(0)
total search56 articles
2003-12-12 | Silicon Labs completes purchase of Cygnal Silicon Laboratories Inc. has completed the acquisition of privately held Cygnal Integrated Products, a provider of analog-intensive 8-bit microcontrollers. Cygnal's portfolio of more than 50 general-purpose products is expected to enhance Silicon Laboratories' existing product line of application-specific mixed-signal ICs. |
2003-06-24 | Production programming options for Cygnal devices This application note gives an overview of production programming options available for Cygnal devices. |
2003-06-24 | Multiple-device JTAG configuration in the Cygnal IDE This application note describes how to configure Cygnal's IDE multiple-device JTAG chain. |
2003-06-24 | Integrating Tasking 8051 tools into the Cygnal IDE This application note discusses how to integrate the Tasking 8051 tools into the Cygnal IDE (integrated development environment). |
2003-06-24 | Integrating Raisonance 8051 tools into the Cygnal IDE This application note discusses how to integrate the Raisonance 8051 tools into the Cygnal IDE (integrated development environment). |
2003-06-19 | Integrating Keil 8051 tools into the Cygnal IDE This application note describes how to integrate Keil 8051 tools into the Cygnal IDE (integrated development environment). |
2003-06-24 | Integrating Dunfield 8051 tools into the Cygnal IDE This application note describes how to integrate the Dunfield 8051 tools into the Cygnal IDE (integrated development environment). |
2003-02-06 | Cygnal USB ?controller eliminates external crystal The C8051F321 Flash microcontroller from Cygnal Integrated Products comes with an integrated full-speed USB 2.0 function controller and PHY. |
2003-11-25 | Cygnal to deploy Credence test systems Cygnal Integrated Products Inc. has purchased two of Credence Systems Corp.'s Octet SoC test systems. |
2002-10-14 | Cygnal offers microcontroller in MLP casing Cygnal's C8051F311 microcontroller is available in a 5-by-5-by-0.9mm, 28-pin MLP casing, providing 50 percent more board space. |
2003-06-05 | Cygnal obtains ISO 9001 certification Cygnal Integrated Products Inc. has announced that it has received the ANSI/ISO 9001:2000 certification. |
2002-08-08 | Cygnal microcontroller offers CAN connectivity Cygnal Integrated Products Inc.'s C8051F040 mixed-signal Flash microcontroller features CAN bus connectivity suitable for industrial control and data acquisition applications. |
2003-05-21 | Cygnal microcontroller features two 16-bit ADCs Cygnal Integrated Products Inc. has released the C8051F060 mixed-signal Flash microcontroller that has two 16-bit 1MSPS ADCs, which can be used in analog intensive embedded applications. |
2003-05-02 | Cygnal MCU incorporates 2KB of Flash The C8051F305 Flash MCU from Cygnal Integrated Products integrates a 25 MIPS 8051 CPU and 2KB of Flash memory into a 3-by-2mm MLP. |
2003-09-11 | Cygnal MCU family has a two-cycle 16x16 MAC unit Cygnal Integrated Products Inc. has announced the availability of its C8051F120 microcontroller family. |
2003-10-09 | Cygnal integrates USB into single chip UART device Cygnal Integrated Products Inc. has announced the availability of its CP2101 USB-to-UART bridge chip. |
2003-05-14 | Cygnal Flash MCU incorporates two 1MSa/s ADCs The C8051F060 mixed-signal Flash MCU of Cygnal Integrated Products features two low-power, 16-bit ADCs. |
2003-08-20 | Cygnal appoints three new distributors in Japan Cygnal Integrated Products has signed three new distributors in Japan, namely: Microtek, Takumi Shoji, and Altima. |
2003-06-24 | Writing to Flash from application code This application note starts with the basics of writing to Flash from application codes on any Cygnal device. Then it discusses details specific to each device series. |
2003-06-24 | Writing to Flash from application code This application note is a collection of routines that can be used to implement a master-mode SPI device in software. |
2003-06-19 | Using the DAC as a function generator This application note describes how to implement an interrupt-driven multifunction generator on C8051 devices using on-chip DACs. |
2003-06-19 | Using the C8051Fxxx on-chip interface utilities DLL The interface utilities DLL (dynamic link library) provides functions to download an Intel hex file to Flash and connect and disconnect to a C8051Fxxx microprocessor. |
2003-06-19 | Using the C8051Fxxx in 5V systems This application note describes how to incorporate Cygnal's C8051Fxxx family of devices into existing 5V systems. |
2003-06-19 | Using on-chip temperature sensors This application note describes how to configure and use the on-chip temperature sensors (temp sensors). |
2003-06-19 | UART in-application code loading examples A UART code loader provides in-system reprogrammability of program code space (Flash) through the serial port. This application note gives an overview of in-application code loading on Cygnal devices and provides two complete examples. |
2003-06-19 | Software UART examples This application note presents a discussion about software UART implementation on C8051Fxxx devices. |
2002-10-14 | Snubbed at home, chip startups pursue options in Asia With start-up semiconductor companies being bypassed in the United States, they are training their eyes in Asia. |
2003-09-30 | Silicon Labs to purchase MCU manufacturer Silicon Laboratories has signed a definitive agreement to acquire Cygnal Integrated Products Inc., a manufacturer of 8-bit microcontrollers. |
2003-06-19 | Serial communication with the SMBus This application note describes the configuration and operation of the SMBus. |
2003-06-19 | Programming FLASH through the JTAG interface The application note describes how to program Flash memories via the JTAG interface. |
Bloggers Say
See what engineers like you are posting on our pages.