total search1543 articles
| 2008-05-23 | ADI beefs up digital isolation portfolio ADI is expanding its extensive family of digital isolation products with a series of four-channel devices that isolate both data and power. |
| 2011-08-01 | Addressing signal integrity issues in high-speed flash devices Learn what can affect signal integrity and how to model and measure it. |
| 2006-09-18 | Address SI issues in nanometer IC design In its truest sense, signal integrity helps ensure that a signal can faithfully propagate to its intended destination with the right logic value within an allocated time. |
| 2011-09-05 | Address issues in capacitive-touch interface design (Part 2) Here's a look at production tuning, one-time compensation, and dynamic compensation. |
| 2004-12-20 | Adding Timing Redundancy to Comm Equipment Designs In a typical telecommunication equipment design, all cards are synchronized to the same clock. Thus, a failure of this clock brings down the data traffic on all cards. |
| 2013-04-01 | Add multi-cell battery system to single-cell designs Front-end power management units will unite multi-cell battery stack designs of future systems and single-cell-based designs of past systems. |
| 2005-09-07 | ADC changes sensor signals IC-Haus GmbH unveiled a 13bit monolithic analog-to-digital converter, which by applying a count-safe vector follower principle, converts sine and cosine sensor signals with a selectable resolution and hysteresis into angle position data |
| 2010-08-24 | Active ORing controller IC supports N-channel MOSFETs Geared towards 12V and 48V high-side redundant bus applications, Picor's latest two additions to its Cool-ORing Active ORing product family include the PI2127, a full-function Active ORing solution and the PI2007, a universal high-speed discrete Active ORing controller. |
| 2014-08-12 | Actions to split into Multimedia co., Android tablet co. The China-based fabless company's move to transform into two private entities underpins internal conflicts among different business units, as well as management ambitions to qualify for government grants. |
| 2003-06-24 | Acterna upgrades SONET/SDH test solution service Acterna has launched the ONT-50 Optical Network Tester v5.0, which features enhanced SD analysis functionality for easy assessment of failure events. |
| 2010-03-11 | Achieving timing closure in basic (PMA direct) functional mode This application note describes two methods to achieve timing closure for designs that use transceivers in Basic (PMA Direct) mode at higher data rates for Altera's Stratix IV GX or Stratix IV GT FPGAs. |
| 2007-01-01 | Achieving high-performance DAQ via USB Properly implemented, a DAQ module can use the PC's USB 2.0 port to pump data into a PC as fast as PCI-based cards. |
| 2013-08-27 | Achieve successful timing closure Find out how to derive design margins for successful timing closure. |
| 2012-07-18 | Achieve robust, secure NVM with anti-fuse technology Anti-fuse technology begins to emerge as a desirable alternative, offering more secure storage while scaling with each new generation of process. |
| 2007-07-01 | Achieve proper audio-video synchronization in digital broadcast One of the overarching goals of a digital broadcasting system is to deliver audio and video in proper synchronization to the viewer. The reason for this is each digital audio and video component in the chain, from production to reception, imposes some degree of latency on the signals passing through it. Each component harbors the potential to cause an audio-video synchronization error at its output. |
| 2016-03-17 | Achieve picosecond precision with FPGA techniques When dealing with digital converters implemented on FPGA, you need to take important features into consideration to reach picosecond precision. |
| 2006-10-16 | Achieve low-power design success at 65nm Tom Chau and Cheng Shi compile tips for designers to ensure success for advanced low-power designs at 90nm and 65nm. |
| 2015-11-12 | Achieve consistent differential interconnect measurements Making sense of a production floor test result in terms of the R&D environment result is difficult. Here is look at a new measurement system touted to solve this problem. |
| 2011-11-09 | Accelerate time-to-market using benchtop EMI scans The use of benchtop very-near-field EMI scanning could facilitate rapid resolution of electromagnetic issues in safety-critical systems design. |
| 2013-02-15 | Accelerate tester-based silicon debug (Part 2) Learn about a detailed check list of must-do practices during verification for testing. |
| 2014-01-14 | Accelerate M2M networking with UDP Learn how user datagram protocol provides the simplest form of data transfer between network members. |
| 2014-07-30 | Accelerate ADAS dev't with radar signal analysis Radar allows fast and clear-cut measurement of the velocity and distance of multiple objects under any weather conditions, making it an enabling solution for automated driving. |
| 2002-12-03 | ACAD EDA tool identifies peak IR drop values The company has released its FinePower dynamic power and IR drop analysis tool for SoCs that is capable of identifying peak IR drop values. |
| 2006-05-10 | AC controllers prevent system failure, overload damage ACC's current sensing devices with output relay switch enable easy and accurate detection of AC overload or underload to prevent system damage. |
| 2002-03-28 | Absopulse switch boosts power supply dropout immunity The LDT2000 is an electronic switch that generates periodic or single interruptions of the mains voltage, letting designers characterize a power supply's response and immunity to such dropouts. |
| 2008-01-18 | ABI: TD-SCDMA to face uphill battle outside China According to ABI Research, TD-SCDMA is likely to face an uphill battle outside of mainland China, even in Hong Kong. |
| 2011-06-24 | ABI survey: Netbooks, tablets equally popular An ABI survey of 1,142 consumers shows that netbooks and media tablets share almost the same level of consumer interest, and that netbook and tablet purchases could result in a prolonged PC lifecycle. |
| 2008-08-18 | A second look at microkernels Microkernels were popular in the 1980s. However, their proponents promised much and delivered little. In 1993 it was demonstrated that the performance problems weren't inherent in the microkernel concept. Today, the reduction in TCB size is the real advantage of microkernels: small size implies fewer bugs and hence, increased security and safety. |
| 2007-10-16 | A quick refresher on filter performance for wireless A quick refresher on some essential elements of filter performance specifications can aid engineers in correctly choosing filters that meet the needs of their particular application. |
| 2012-05-08 | A primer on JESD204 standard for ADCs Learn about this digital interface standard and its design implications. |
Bloggers Say
See what engineers like you are posting on our pages.
All rights reserved.