Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > discharge

discharge Search results

?
?
total search827 articles
2014-09-25 Understanding electrostatic discharge
Here is an overview of electrostatic-discharge test models, failure modes, protection strategies, and Texas Instruments procedures to guard against ESD failures.
2015-10-09 Simplifying battery charge/discharge cycling
Read about source measure unit instruments touted to offer simpler battery charge/discharge cycling, offering voltage and current sourcing and measurement ranges that are well suited for such application.
2002-01-23 Sealake SLA battery delivers low self-discharge rate
The FM6100A SLA battery is manufactured with cathode absorbents that prevent the quick evaporation of battery fluid.
2011-11-24 Resistors tolerate >25kV electrostatic discharge
The devices feature exceptional load-life stability to 0.05 percent at 220C for 2,000 hours at working power.
2012-10-23 IVT sensor addresses charge, discharge cycle challenges
Isabellenhtte's solution to the challenges posed by charge and discharge cycles utilises an IVT sensor module which is available in a modular design.
2011-06-24 Fine-tuning Impedance Track battery fuel gauge with LiFePO4 cells in shallow discharge apps
The Impedance Track battery-fuel gauging technology from Texas Instruments (TI) is an adaptive algorithm that learns how a battery's characteristics change over time.
2004-10-11 Filter arrays with 15kV contact discharge ESD protection
CMD released the first products in its new family of packaged electromagnetic interference filter arrays with electrostatic discharge protection.
2004-02-12 Fengge battery offers low self-discharge
Zhongshan Fengge Battery has released a regulated sealed lead-acid battery that features low self-discharge and long life.
2003-07-28 Eve battery features <1 percent self discharge
The ER34615 lithium battery from Eve Battery Co. Ltd features a 3.6V operating voltage and a <1 percent per year self discharge.
2014-12-17 Electrostatic discharge: Take it on
If you don't proactively plan to kill ESD transients before they run unchecked on your PCB traces, there's a good chance that an ESD event will kill your product.
2013-04-08 Electro-static discharge design best practices released
Silicon Integration Initiative said the document provides comprehensive guidelines for incorporating ESD protection into IC design flows.
2005-02-10 Discharge resistor modules pre-mounted on the capacitor deliver enhanced reliability
Epcos has optimized its discharge resistor modules based on hybrid ceramics to simplify mounting of discharge resistors on PFC capacitors and enhance reliability.
2002-03-13 Cymer unveils dual-discharge-chamber technology
The company has unveiled a dual-gas-discharge-chamber technology that is claimed to deliver higher power and tighter bandwidth for DUV lithography applications across the 248nm, 193nm, and 157nm wavelengths.
2010-04-19 Capacitor-discharge IC reduces power waste
Power Integrations offers CAPZero, a family of two-terminal, automatic X capacitor discharge ICs that eliminate power losses while allowing power supplies to comply with safety standards.
2004-11-16 Wireless chip-to-chip link shows promise
Proximity Communication is an implementation of such a scalable I/O technology that uses the lithographic pitch of on-chip wires.
2008-10-03 Wide input range earmarks current-sense amplifiers
Maxim Integrated Products introduces the MAX9928/MAX9929 low-cost, current-sense amplifiers for monitoring charge and discharge currents.
2003-05-26 Why does USB 2.0 need circuit protection?
This application note discusses the procedures and parameters for protecting Universal Serial Bus (USB) 2.0 from overcurrent events.
2003-05-29 Why do Set Top Boxes need Circuit Protection?
This application note discusses the need for set top boxes to be protected against transients such as ESD.
2004-01-16 Using TVS diode in ESD protection of portable devices
TVS diodes are very efficient in ESD protection of portable devices, which is very important for their un-ideal working circumstances.
2015-11-25 Tracking down ECU disturbances from EMI
In this article, we examine how to use oscilloscopes to detect ECU disturbances from electromagnetic interference.
2003-05-29 The ESD Problem
This application note discusses the properties and sources of Electrostatic Discharge (ESD).
2003-05-26 The ABCs of Littelfuse Multilayer Suppressors
This guide discusses the applications, basics, and common questions of Multilayer Suppression device technology.
2005-09-06 Termination networks deliver ESD protection to memory busses
Designed to terminate high-speed memory busses, TT electronics IRC Advanced Film Division has introduced a new series of termination and ESD protection networks.
2001-01-01 Techniques for handling electromagnetic interference
This technology article focuses on the primary steps that engineers can take at the PCB level to control common-mode radiated EMI.
2007-02-05 Tape and reel informationRF modules
The diagrams within this application note provide information on tape materials, dimensions, adherence to industry standards of Skyworks carrier tapes.
2002-07-02 STMicroelectronics transceiver has 115kV ESD protection
The ST485E low-power RS-485/RS-422 transceiver IC from STMicroelectronics features 115kV ESD protection without latch-up.
1999-12-16 Static handling and testing techniques for MOS devices
Caution must be used when handling and testing MOS devices. Standard procedures should include the ones listed here in order to avoid possible static damage.
2005-06-09 ST Micro balances line capacitance, attenuation in new chips
The two new low-capacitance EMI-filter and electrostatic-discharge protection chips from STMicroelectronics are designed to suppress EMI/RFI noise in sensitive, high-volume equipment
2012-12-06 Speed up time-to-market by cutting ESD test time
To reduce test times, increase qualification speed and preserve accuracy, an intelligent sampling method can be applied to groups of pins that share the same applications.
2012-02-23 Silicon ESD protectors tout lowest capacitance
The SESD products offer capacitance of 0.10pF (bi-directional, typical) and 0.20pF (uni-directional, typical), and ESD protection of 20kV air and contact discharge.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top