Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > dynamic voltage programming

dynamic voltage programming Search results

?
?
total search61 articles
2005-08-05 Sensor IC packs 8051 core
As a 'smart sensor' conditioner, the SSP1492 from Sensor Platforms gives any sensor the ability for self-identification.
2005-08-22 RF modules enable wireless DAQ
SRI PMD's Wireless Link line of products provide realtime connectivity between sensors or transducers and instrumentation that can be separated by distances of about 500 feet.
2007-05-01 RadioScape picks Blackfin for mobile TV platform
DAB software developer RadioScape has chosen ADI's Blackfin processor as its mobile-TV platform and will share its extensive DAB knowledge with ADI to build mobile-TV receivers.
2005-03-03 PXI plug-in is a 7-1/2-digit DMM, digitizer
NI not only offers a dazzling array of modular instruments, but it's also constantly dishing up new products such as this new 3U-sized single slot PXI/cPCI 7-1/2 digit DMM.
2003-09-01 Predictive analysis for low-power IA designs
Predictive analysis techniques incorporates low-power design techniques and ensures adherence to new design methodologies.
2005-12-16 Polar modulation has right stuff
Polar-modulation solutions for cellular radios are emerging as the de facto technique in GSM/Edge market.
2006-11-20 PIC MCU enables cost-effective fan/small motor control
Microchip Technology's newest general-purpose PIC MCU offers designers specialized peripherals for cost-effective control of fans or small motors.
2008-03-27 NI expands C Series line for data loggers
NI has announced four new C Series modules for data-logging applications including vibration/acoustical data logging and in-vehicle, structural, temperature and pressure testing.
2003-10-16 Mixed-signal integration key to future power management in portables
IC integration is simplifying the design of portable power electronics--maximizing battery life in the smallest board area and lowering cost.
2010-11-30 MDDC 4-channel sensor signal amplifier designed for fast digital power conversion
MAZeT's MDDC 4-channel sensor signal amplifier boasts fast conversion
2008-06-23 Maxim presents programmable analog/digital VGA
Maxim Integrated Products has introduced the MAX2065, the industry's only fully programmable, multistate, analog and digital IF/RF variable-gain amplifier.
2002-04-11 MathStar expands Gemini line with TIA, VCSEL driver
Targeted for 40Gbps SFF and SFP parallel modules, the MS1435 transimpedance amplifier and MS1436 VCSEL driver operate at 3.36Gbps with a 3.3V supply, and are suitable for VSR links, optical backplanes, and box-to-box and chassis-to-chassis applications.
2010-10-01 LED drivers boast brightness, backlight control
Advanced Analogic Technologies delivers new high efficiency, low-power LED drivers with backlight control and dimming
2006-12-13 HDTV-on-a-chip promises simpler system
Broadcom Corp. announced a "television-on-a-chip" which it touts as the first digital HDTV silicon solution to support full 1,080-progressive display resolution.
2008-10-24 HB LED driver enables green lighting for automotive apps
Maxim Integrated Products has released the MAX16826 programmable, four-string high-brightness (HB) LED driver for white, RGB, and RGB-plus-amber LED configurations.
2006-09-25 GateFlow module includes wideband DDC IP core
Pentek released the newest addition to its GateFlow installed-core products that includes a factory-installed wideband digital downconverter IP core.
2007-04-26 Four-channel power managers suit CE apps
Summit Microelectronics has expanded its family of Programmable Power Manager (PPM) ICs with the SMB113A and SMB117 devices targeted at higher-power applications.
2009-12-18 Flash MCU ups impedance matching at low power
Atmel Corp. has launched the SAM3S series of 18 general-purpose Cortex-M3 based flash microcontrollers that improve impedance matching, simplify PCB design and save 50 percent power.
2012-10-17 Exploring split-gate thin-film storage
Based on nanocrystals, SG-TFS is touted to provide fast, efficient read/write operation in a reliable, economical and scalable technology.
2014-07-25 Exar delivers programmable power design tool
PowerArchitect can be used to set or modify a host of parameters when using any of Exar's growing range of Universal PMIC advanced programmable power management chips and modules.
2013-05-22 Enhance functional safety in embedded designs
Find out how to increase functional safety in networked embedded designs.
2010-04-22 Energy management SoC handles eight channels
Teridian Semiconductor is rolling out the 78M6618 (6618) energy measurement SoC designed for use in data center power distribution units.
2015-05-29 Enable smarter power monitoring using Microchip's 16bit MCUs
The MCP39F511 single-phase power-monitoring IC targets commercial and industrial products such as lighting and heating systems, smart plugs, power meters and AC/DC power supplies.
2011-10-01 Employing SoC for cost-effective 3D designs
Here's a look at the current 3D active shutter architectures vis-à-vis the next generation solutions now available.
2006-03-20 Electric bicycle solutions at IIC-China
During the recently concluded IIC-China, Infineon, NEC and Atmel demonstrated their respective semiconductor solutions targeted at electric bicycle applications.
2008-01-16 Design versatile high-speed ADCs
The high-speed ADC is the bridge between the analog and digital hardware, and many times it is placed in the responsibility of an all-digital or all-analog hardware designer. When that happens, the programmability has easier acceptance with the digital hardware designer, but it can save the day for an analog hardware designer who failed to set up the digital timing or signal integrity properly.
2008-12-15 CPLDs boast 36 percent smaller footprint
Lattice Semiconductor Corp. has announced two new, small-footprint packages for their ispMACH 4000ZE CPLDs. The new space-saving packages enable designers to use these ispMACH 4000ZE devices in a board space that is 36 percent smaller than previously possible.
2007-08-06 Choosing, designing the best filter for an effective DAQ system
Filters are very necessary and unavoidable "evil" of the signal path thus, designers must understand their options when making the filter decisions.
2003-10-16 Battery apps benefit from MCU clocking, mode control
The increase of system functionality can only be accomplished if firmware/software engineers understand the tools available in the microcontroller as well as hardware options.
2006-06-14 ARM-wrestling: MCU vs. core
Designers must wrestle between taking advantage of STMIcroelectronics' off-the-shelf ARM 9E-based solution and designing their own solution with ARM Ltd's Cortex-R4 ARM core.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top