Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > electrostatic discharge

electrostatic discharge Search results

?
?
total search220 articles
2014-09-25 Understanding electrostatic discharge
Here is an overview of electrostatic-discharge test models, failure modes, protection strategies, and Texas Instruments procedures to guard against ESD failures.
2011-11-24 Resistors tolerate >25kV electrostatic discharge
The devices feature exceptional load-life stability to 0.05 percent at 220C for 2,000 hours at working power.
2004-10-11 Filter arrays with 15kV contact discharge ESD protection
CMD released the first products in its new family of packaged electromagnetic interference filter arrays with electrostatic discharge protection.
2014-12-17 Electrostatic discharge: Take it on
If you don't proactively plan to kill ESD transients before they run unchecked on your PCB traces, there's a good chance that an ESD event will kill your product.
2004-11-16 Wireless chip-to-chip link shows promise
Proximity Communication is an implementation of such a scalable I/O technology that uses the lithographic pitch of on-chip wires.
2003-05-26 Why does USB 2.0 need circuit protection?
This application note discusses the procedures and parameters for protecting Universal Serial Bus (USB) 2.0 from overcurrent events.
2003-05-29 Why do Set Top Boxes need Circuit Protection?
This application note discusses the need for set top boxes to be protected against transients such as ESD.
2004-01-16 Using TVS diode in ESD protection of portable devices
TVS diodes are very efficient in ESD protection of portable devices, which is very important for their un-ideal working circumstances.
2015-11-25 Tracking down ECU disturbances from EMI
In this article, we examine how to use oscilloscopes to detect ECU disturbances from electromagnetic interference.
2003-05-29 The ESD Problem
This application note discusses the properties and sources of Electrostatic Discharge (ESD).
2005-09-06 Termination networks deliver ESD protection to memory busses
Designed to terminate high-speed memory busses, TT electronics IRC Advanced Film Division has introduced a new series of termination and ESD protection networks.
2007-02-05 Tape and reel informationRF modules
The diagrams within this application note provide information on tape materials, dimensions, adherence to industry standards of Skyworks carrier tapes.
2002-07-02 STMicroelectronics transceiver has 115kV ESD protection
The ST485E low-power RS-485/RS-422 transceiver IC from STMicroelectronics features 115kV ESD protection without latch-up.
2005-06-09 ST Micro balances line capacitance, attenuation in new chips
The two new low-capacitance EMI-filter and electrostatic-discharge protection chips from STMicroelectronics are designed to suppress EMI/RFI noise in sensitive, high-volume equipment
2012-12-06 Speed up time-to-market by cutting ESD test time
To reduce test times, increase qualification speed and preserve accuracy, an intelligent sampling method can be applied to groups of pins that share the same applications.
2003-05-26 Set Top Box Over-Voltage and Over-Current Protection
This application note discusses the different threats that are posed to the STB both internally and externally, and the suppression devices that can be used to protect them.
2006-06-19 Semtech unrolls 'first' ultra-small, 6-line ESD shield
Semtech claims to offer the industry's first ultra-small six-line protection device against electrostatic discharge (ESD).
2006-04-07 Semtech protection devices serve 3G/CMDA phones
Semtech's EClamp 237xP devices protect 3G/CMDA mobile phones from electrostatic discharge, increased levels of electromagnetic interference and radio frequency interference.
2003-05-29 Selecting an ESD Suppressor
This application note provides guidelines for choosing the appropriate ESD suppressor for a given application.
2006-04-25 Schottky, ESD diodes come in SOD-723 package
ON Semiconductor targets portable products with the introduction of three Schottky diodes and three ESD diodes in a 1.4-by-0.6-by-0.5mm SOD-723 package.
2005-09-20 RS-232 devices with system-level IEC 61000-4-2 ESD protection
Texas Instruments introduced new RS-232 devices with system-level IEC 61000-4-2 ESD (Electrostatic Discharge) protection.
2000-05-03 Reduce time to market using FLASH technology
This paper describes the Flash-based processors that can be used to reduce the cost and time to market for a product. The primary savings come in the form of reduced development time and easier debugging of the product.
2006-05-16 Protection devices offer low capacitance for HDMI-enabled products
Semtech launched a four-line protection device with the low capacitance and high protection levels
2003-05-26 Protecting the Universal Serial Bus from Over Voltage and Overcurrent Threats
This application note addresses the various requirements for protecting the USB from overcurrent and overvoltage environmental threats.
2003-06-30 Protecting IGBTs and MOSFETs from ESD
This application note discusses how to protect IGBTS and MOSFETs from ESD and how HEXFET users can implement and benefit from similar ESD control programs.
2013-05-29 Protect USB 2.0 interfaces against ESD
Find out how to protect USB 2.0 ports with NXP general-application discretes parts.
2016-02-01 Preventing common MEMS failure mechanisms
The first step in ensuring MEMS reliability is to avoid common pitfalls during the design and process development phase to assure a stronger and more reliable part-upon-marketplace introduction.
2012-07-05 Prevent Hindenburg-level USB meltdown in harsh industrial environments
Learn how USB can suddenly go up in smoke, and what can be done to prevent it.
2013-01-15 Optocouplers for safe, reliable electrical systems
There are several technologies that can provide electrical isolation, but optocouplers deliver safety and protection unparalleled by any other isolation technology.
2005-08-30 Oki implements Sarnoff's on-chip ESD protection in high-voltage ICs
Oki Electric Ind. Co. Ltd has produced ICs in 0.5um/43V, 0.35um/16.5V and 0.25um/25V process technologies using TakeCharge design technology from Sarnoff Europe of Gistel, Belgium.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top