Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > input signal

input signal Search results

?
?
total search2433 articles
2003-05-28 Using AM400 with single-ended input signal
This application note shows how the AM400 can be used for single-ended input signals
2012-10-18 Understanding SAR and delta-sigma ADC signal path
Learn about the signal characteristics of several representative sensors and signal chain components for each converter type
2015-04-16 Understanding ADC input resistance and sampling
Learn how the input resistance of an analog-to-digital converter depends on the architecture and how to derive a mathematical function for it in a given case
2013-02-28 Understand perfect pseudo-differential input ADCs
Read about a practical application of the time realignment filtering technique.
2011-10-03 Signal integrity issues at 10 Gbit/sec and beyond
Know the challenges that this high-speed domain brings, as well as basic techniques for addressing them.
2011-08-01 Signal chain basics: Using the digital features of high-speed DACs
Here's a look at the function and value of each of the digital features in today's high-speed digital-to-analog converters.
2011-12-19 Signal chain basics: Understand spurious signals in high-speed ADCs
Learn the various approaches for tracking down spurious signals in high-speed analog-to-digital converter systems.
2015-09-15 Signal chain basics: Noise in ADCs
There are many different sources of noise in an ADC. Read this to learn about the three different categories based on their frequency characteristics.
2012-12-14 Signal chain basics: Isolating analogue signals
Here's a cost-optimised solution for analogue isolation using a class-D amplifier in combination with a single-channel digital isolator.
2012-04-24 Signal chain basics: How 20W amplifier can ruin a speaker system
Know the causes of this surprisingly common problem, and how to work around them.
2011-11-30 Sensor signal ICs target resistive bridge conditioning
Sensor system designers can select among four pin-compatible products to obtain the best fit in terms of sensor type, system safety and module cost requirements.
2007-10-23 Safety controller features multiple input devices
Banner Engineering has launched the SC22-3 safety controller, an easy to configure safety module that incorporates numerous input devices and manages multiple safety-related functions
2008-10-03 Rouse future digital input designs
Modern digital input module designs require high-channel count, small form factor, low-power consumption and high data rates. Conventional designs using discrete resistor-diode networks are unable to match requirements due to high-power use and extensive component count. Instead, new innovative circuit designs such as digital input serializers exceed requirements and thus, lay the groundwork for future digital input designs
2015-11-17 Reduce redesign risk with correct ADC analogue input
There are some choices that need to be made when deciding which converter is to be used for a particular application. Here we will explore the different available analogue input types
2011-09-15 Redriver provides signal equalization
NXP has announced the availability of its USB 3.0 SuperSpeed redriver, the PTN36241B, which can support 5Gbit/s per channel.
2011-12-01 Power IC supports 3.5-6.5V input voltage
The TPS75005 features two low-noise, 500mA low-dropout linear regulators for TI's real-time control MCUs.
2007-09-10 Noise canceller improves cellphone signal sensitivity
Based on Quellen's patented CSP noise canceling technology, the ultrasmall CMOS noise canceller cancels unwanted RF interference to improve cellphone signal receiver sensitivity
2005-01-05 NJR electronic volume with input selector
The NJW1154 from New Japan Radio is a 2-channel electronic volume with 6-in, 1-out stereo audio selector.
2005-06-27 New limiting post amplifier from Micrel w/ TTL signal detect
Micrel's SY88933AL is a low power limiting post amplifier w/ TTL signal detect, designed for use in fiber-optic receivers and connects to typical transimpedance amplifiers
2006-03-15 Multichannel signal processors simplify audio designs
Two multichannel analog signal processors that combine six separate component functions were introduced recently by Wolfson Microelectronics plc
2004-05-20 Maxim launches three video signal conditioners
The video signal conditioners from Maxim optimize the video input-signal quality for further video processing through a crosspoint switch or a video decoder.
2005-06-24 Linear Tech ADCs provide zero average differential input current
Linear Technology Corp.'s new series of delta-sigma analog-to-digital converters features a novel front-end design that is able to directly digitize a wide range of sensors
2015-02-06 Examining Tektronix RSA306 signal analyser
Read about the trade-offs needed to produce a spectrum analyser in a small form factor while retaining much of the performance and usability of much larger instruments
2007-12-13 Clock dividers feature fail-safe input protection
Micrel has expanded its clock divider family with the introduction of LVPECL/LVDS, ultralow-jitter clock dividers with fail-safe input protection and internal termination
2007-08-10 Analog video signal requirements: Similarities and differences (Part 4
This article will explore some of these analog video signal requirements and analog I/O design in these video systems, with a focus on power supply voltages and power dissipation
2002-06-28 ADI ships dual-channel W-CDMA receive signal processor
The VersaCOMM AD6634 dual-channel receive signal processor from Analog Devices Inc. performs 80MSa/s in the input side, and outputs signals into a 16-bit parallel output port.
2014-07-30 Accelerate ADAS dev't with radar signal analysis
Radar allows fast and clear-cut measurement of the velocity and distance of multiple objects under any weather conditions, making it an enabling solution for automated driving.
2016-02-25 A primer on signal bandwidth
As the speed of analogue and digital designs increases, we need an even more thorough understanding of the errors caused by insufficient bandwidth.
2009-04-21 30?m IR detector handles low input signals
Sofradir has demonstrated the new Avalanche Photodiode (APD) mid-TV format IR detector for amplifying low input signal.
2002-01-21 ZMD signal conditioner suits sensors with differential output signal
Based on a 16-bit RISC microcontroller, the ZMD31020 differential sensor signal conditioner is geared for sensors with a differential output signal such as the Wheatstone-bridge type
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top