Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > integrated

integrated What is Monolithic Microwave Integrated Circuit (MMIC)? Search results

?
?
What is Monolithic Microwave Integrated Circuit (MMIC)?
A Monolithic Microwave Integrated Circuit (MMIC) is a type of IC that operates at microwave frequencies (300MHz to 300GHz), performing such functions as microwave mixing, power amplification, low-noise amplification and high-frequency switching.
total search13186 articles
2004-10-25 Intel taps 90nm process for integrated network processor
Intel is leveraging its 90nm process technology to roll out what one analyst said is the first integrated control and data plane processor.
2000-06-13 Integrated, Single-Step, 10dB Attenuator for Power Control Applications
This technical note examines the RF2421 single-step 10dB attenuator that enables radio designers to enhance system performance by appropriately setting RF signal levels through their systems.
2012-02-24 Integrated voltage regulators cut power by 20%
Inverted voltage regulation will be able to respond to the energy needs of future CMOS chips in nanoseconds, compared to microseconds with off-chip voltage regulators, the researchers said.
2006-10-04 Integrated video processor targets embedded market
Designed specifically for the embedded market, VIA Technologies' VIA CX700M integrated video processor integrates premium graphics, audio, video, memory, storage and HDTV support in a single chip design.
2009-01-08 Integrated video filters/buffers simplify design, cut cost
STMicroelectronics NV has introduced the TSH345 and TSH346 video filter/buffers for consumer electronic that offer cost saving and supply-chain advantages.
2005-04-12 Integrated video filter targets HDTV apps
This video filter from Fairchild Semiconductor is selectable for standard definition (SD), progressive scan (PS) or high definition (HD) standards, and offers tri-level sync and a bypass mode that permits the passing of 1080p and HDTV signals.
2005-09-16 Integrated video amp saves space, cost in camera phones
Mobile camera phones pose challenging technical requirements that can be eased by an integrated video amplifier
2005-03-29 Integrated varistor reduces component count
Stackpole has introduced a dual-function device that protects electronic equipment operating at a low voltage against voltage surges and high frequency noise
2008-09-22 Integrated tuner IC touts superior performance
Maxim Integrated Products introduces the MAX2163A, a silicon tuner for use in 1- and 3-segment, ISDB-T applications operating in the VHF and UHF frequency bands.
2005-08-16 Integrated tool kit speeds coding for configurable processors
The MetaWare Development Toolkit from ARC includes new releases of that company's MetaWare C/C++ compiler and debugger, as well as an Eclipse-based IDE, all aimed at ARC's line of 32-bit configurable CPU and DSP cores for SoC designs.
2004-10-19 Integrated thermal designer analyzes complex ICs
PTD v2.0 from Harvard Thermal works with the Encore package-design system from Synopsys to automatically create highly-detailed thermal models at the component level.
2006-05-12 Integrated tester checks the WiMAX PHY layer
This $60,000 software-upgradeable product from LitePoint looks like just the ticket for testing wireless WiMAX designs based on the IEEE-802.16-2004 standard.
2011-06-07 Integrated switch saves PCB space
Avago Technologies has launched a new set of high-power switch and low noise amplifier modules for TD-SCDMA and TD-LTE base transceiver station applications.
2010-08-20 Integrated SSDs pave the way for new memory class
SanDisk Corp.'s embedded solid state drives are smaller than a postage stamp and offer higher capacities and performance than existing storage solutions, for tablet PCs and ultra-thin notebooks.
2009-11-11 Integrated solutions make analog filter design easy
This article examines a filter implementation, first using a continuous-time filter and then with a switched-capacitor filter approach to show the differences in performance and complexity.
1999-04-08 Integrated solutions for solid state electricity metrology
This paper gives an overview of electricity meter design using solid state electronics. It discusses various architectures and some of the key technologies that allow reliable and cost-effective solid-state meters to be implemented. It also discusses semiconductor reliability issues and the challenges posed by the EMI/EMC requirements for solid-state meter approval.
2006-06-26 Integrated software development tools support Blackfin DSP
ADI unrolled the Blackfin Multimedia Starter Kit to help reduce time-to-market for embedded systems designs in next-generation digital radio, mobile TV and other media apps.
2012-03-30 Integrated sensor nodes with GSM modems simplify wireless DAQ
Here's a look at the implementation of a sensor network using a global system for mobile communication modem.
2007-05-01 Integrated SAR ADC eases motor control design
ADI's AD7264 device simplifies industrial motor control designs by integrating two successive-approximation ADCs, a programmable gain amplifier and four comparators on a single chip.
2009-04-08 Integrated RF LDMOS bias controllers debut
Maxim Integrated Products has introduced the MAX1385/MAX1386/MAX11008 dual RF laterally diffused metal oxide semiconductor (LDMOS) bias controllers, which the company claims is the industry's smallest to integrate all of the A/D and D/A interfaces and logic functions for cellular base station control.
2010-04-12 Integrated RF ICs save space in comms apps
Analog Devices Inc. has launched two RF ICs for broadband communications systems that can reduce component count by more than 75 percent without compromising performance.
2009-03-20 Integrated RF charging tech powers battery
The new PowerPlane MX Li-ion battery from Planar Energy Devices is targeted for applications that require self-sufficient milli-amp-hour energy storage. It has an integrated RF wireless charging technology.
2014-12-30 Integrated reverse logistics promises cost advantage
For best results, organisations need to partner with a single reverse logistics provider rather than diluting the process across multiple vendors, where cost and security issues are hard to control.
2009-06-12 Integrated receiver subsystem trims design time
Linear Technology Corp. has released the LTM9002, a dual IF/baseband receiver subsystem that includes a high performance dual 14bit ADC sampling up to 125MSps, anti-aliasing filters, fixed gain differential ADC drivers and 12bit, trim DACs.
2009-10-09 Integrated receiver simplifies the analog side of digital predistortion
Digital processing power offers several methods to improve the efficiency of base station PAs. Improvements in PA efficiency lead to significant reduction in the operating expense for cellular service providers.
2009-12-14 Integrated receiver chip minimizes DTV BOM
The miniature RF-to-baseband chip architecture combines tuner, demodulator, filters and amplifiers.
2008-09-25 Integrated PSoC, nvSRAM secure updated data logging
Cypress Semiconductor has released the industry's first device to integrate a non-volatile nvSRAM and a programmable SoC in a single package.
2009-02-05 Integrated protection device fits mobile apps
ON Semiconductor has released what it claims to be the first integrated bi-directional device, with positive and negative overvoltage protection and overcurrent protection.
2014-11-19 Integrated production control system promises to reduce cost
The CENTUM VP R6.01 from Yokogawa is geared to meet the most stringent industry requirements for safe and reliable plant operations and environmental protection.
2011-09-15 Integrated pre-driver saves 60% space
TI has launched DRV8301, a three-phase brushless motor pre-driver, which integrates step-down voltage regulator and dual current-sense amplifiers, resulting to a 60 percent reduction in board space.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top