Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > low jitter performance

low jitter performance Search results

?
?
total search424 articles
2011-10-10 Clock IC offers 2.4MHz-2.6GHz output frequency
TI's clock generator cuts component count by up to 80 percent and BOM by up to 50 percent.
2009-10-05 Clock IC eases synchronization in video apps
Silicon Laboratories Inc. has beefed up its Any-Rate Precision Clock family with the release of Si5324 clock IC optimized for professional broadcast video applications.
2008-08-15 CDR solution rolls for optical, backplane apps
Exar Corp. has developed the XRT91L33, a SONET/SDH OC-3/-12 clock and data recovery (CDR) device designed for standard optical and backplane applications.
2005-02-17 CDR ICs accommodate changing bit rate requirements
ADI unveiled its new continuous-tuning clock and data recovery ICs that can recover any incoming data pattern without external control or the use of a reference clock.
2014-05-16 Cadence jumps on 28nm FD-SOI train with IP offerings
Cadence announces the availability of IP solutions on 28nm FD-SOI process as well as support for PCI Express 4.0 architecture.
2006-11-14 Buffer and MUX family delivers fail-safe protection
Micrel announced what it touts as the industry's first 4.25Gbps buffer and multiplexer family with fail safe input circuitry for SONET, Fibre Channel, and Ethernet data and clock distribution.
2003-04-09 Broadcom 10GbE transceiver packs equalizer on-chip
Broadcom Corp.'s BCM8703 single-chip serial 10GbE/Fibre Channel transceiver is smaller than its predecessor, the BCM8702.
2014-11-28 Boost data rates with clock generators
To meet the intensifying demands for higher data rates, high-speed networking and data centre equipment calls for frequency-flexible clock generator IC solutions to support faster data rates.
2016-05-18 Benefits of adding isolation to LVDS interfaces
Adding isolation to LVDS interfaces provides a transparent solution that can be inserted into existing signal chains for high-speed and precision measurement and control applications.
2009-02-09 Backplane 101: RapidIO, PCIe, Ethernet
RapidIO, PCIe, and Ethernet each offer unique benefits. The article explains how each technology works, and examines its strengths and weaknesses. It also discusses why RapidIO is often the best choice for embedded systems.
2010-04-14 ASSP crystal oscillators handle 2-159MHz frequency
From Pericom Semiconductor Corp. comes a family of ASSP crystal oscillators for frequencies ranging from 2MHz to 159MHz.
2006-07-27 ARM releases next-gen DDR memory solutions
The new ARM Velocity DDR products are compliant with JEDEC standards for DDR, DDR2, Mobile DDR and GDDR3 SDRAM and support standard CMOS processes on 130-, 110-, 90- and 65nm nodes for leading foundries.
2006-07-28 Altera ships 'largest' FPGA with embedded transceivers
Altera has announced that it has begun shipping the Stratix II GX family's EP2SGX130 device, said to be the industry's largest FPGA with embedded transceivers.
2003-03-21 AKM DAC supports SACD DSD, DVD-Audio formats
Asahi Kasei Microsystems has announced the availability of the AK4358 8-channel DAC that is compatible with both the SACD DSD and DVD-Audio 24-bit formats.
2011-12-13 Advances in hi-fi digital audio streaming
Know the key elements of the architecture of digital audio streaming equipment, and the new board-level technology that developers should consider when evaluating technology for new product designs.
2015-09-03 ADI silently snatches piezoelectric MEMS start-up
Analog Devices acquired piezoelectric MEMS resonator startup Sand 9, which hit technical issues amidst changing markets and effectively outlasted investors' patience.
2002-04-29 ADI display interface IC uses
esigned for LC projectors, HDTVs, and projectors, the AD9882 display interface IC from Analog Devices Inc. provides an analog interface and Digital Visual Interface (DVI) capability, and uses the
2011-11-17 Address challenges in 40G/100G SerDes design, implementation
Read about the various aspects of SerDes design such as transmit/receive portions.
2007-08-23 ADCs target WiMAX, 3G wireless applications
National Semiconductor has launched new ADCs with a full-power bandwidth of 1.1GHz and targeted at WiMAX and 3G wireless communications applications.
2005-09-29 ADC delivers 72dBFS SNR, 84dBc SFDR at 170MS/s
Texas Instruments announced its new 14bit, 170MS/s ADC that offers 72dBFS signal-to-noise ratio and 84dBc spurious-free dynamic range at the maximum sample rate of 170Msamples/s and an input frequency of 150MHz
2013-07-16 Adapting a PCIe design to specific app needs
With the appropriate mix of PCIe clock generators and buffers, embedded systems developers can address the unique requirements of various applications.
2006-05-25 14bit ADC has full power bandwidth of 1.1GHz
National Semiconductor's 14bit ADC14155, a 155MSps ADC, offers a full power bandwidth of 1.1GHz, the highest in the industry.
2006-08-03 10Gbps dual CDR rolls for short-reach XFP apps
AMCC has developed the S19256 dual CDR for use in short-reach and intermediate reach XFP modules.
2005-01-27 WLAN chipset designed specifically to handle video challenges
Using a proprietary technology, ViXS was able to take in two signals from the same stream, combine them in the PHY and increase the amplitude of the signal.
2005-12-01 WiMAX advantages bring about new challenges
As WLAN engineers tackle this emerging standard, they face many system considerations, especially in RF architectures.
2009-02-26 Will DisplayPort get a second chance?
With the of widespread emergence and popularity HDMI, why is there more than 180 computer and consumer electronics companiesand countingactively supporting DisplayPort, another audio/video interface standard?
2005-09-12 Why Class D amplifiers may test well but often sound terrible
Class D amplifiers are fundamentally different from analog amplifiers, not only in their circuitry, but more importantly in the way they operate
2005-01-10 When bad packages kill good PCBs
How to avoid packaging problems in off-the-shelf ICs and FPGAs, and ASICs.
2006-03-16 What-If tools for everyone
Here is a comprehensive tool set providing an iterative, what-if analysis that engineers can run before PCB layout begins.
2015-10-13 Wearable PCB designs call for attention to basics
In the absence of printed circuit board standards in wearable Internet of Things electronics, hardware developers need to pay close attention to fundamentals.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top