Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > microstrip line

microstrip line Search results

?
?
total search17 articles
2002-09-20 T/R switch for IMT-2000 handset applications
This application note describes a handset T/R switch design that enables its antenna to be electronically connected to either the transmitter or receiver.
2002-09-20 A Colpitts VCO for wideband (0.95GHz to 2.15GHz) set-top TV tuner applications
This application note describes the design of a broadband Colpitts VCO that incorporates the SMV1265-011 varactor diode.
2015-07-15 E-band cost, reliability concerns in MMIC packaging
Traditional semiconductor packaging approaches either cost too much or suffer from signal integrity issues. However, new techniques are becoming available that can address these problems.
2006-01-03 Double-balanced mixers convert between 4GHz to 38GHz
Hittite's new hermetic mixer modules are well suited for military, space, wideband telecom, industrial, microwave radio and test equipment applications from 4GHz to 38GHz.
2015-01-19 Enhanced SMT pad design for signal transmission
In this article, we present an analysis that proves that insertion of a cut-out on the reference plane underneath the SMT pads reduces the impedance mismatch and increases the bandwidth of the transmission line
2002-04-19 MEMSCAP rolls out MEMS-based microwave filters
MEMSCAP SA has developed what it claims to be the first commercially-available MEMS-based microwave filter for use in local multipoint distribution services, and is aimed at reducing the size and cost of customer premise equipment.
2002-11-07 FDK phase shifter has 1.7dB maximum passage loss
The FS2501 phase shifter module from FDK Corp. operates from 24.5MHz to 25.5MHz and exhibits a maximum passage loss of 1.7dB and a reflective loss of 17dB.
2014-04-03 Dealing with impedances on the test bench
Designers and producers of digital high-speed systems are about to confront the challenge of having to consider high-frequency design aspects.
2004-07-01 CMOS RF SoC design shoots for 60GHz
The article describes a potential design of an RF SoC that is backward-compatible with a 60GHz WLAN systems.
2007-11-16 Use time-domain methods to measure crosstalk
This article discusses the elements of crosstalk, and demonstrates how you can measure crosstalk on a single-layer PCB using an oscilloscope or a signal analyzer.
2007-08-01 Overcome high-speed FPGA design challenges
When using high-speed FPGAs in a design, it is important to consider several design issues both before and during board development.
2007-01-16 New materials expand wireless options
Designers of portable wireless products now have new tools, approaches and components that provide fresh trade-offs in the quest for a perfect antenna. Newer antenna designs and components give designers other options
2000-12-01 Infiniband requires design trade-offs
Primary players in the computer industry are developing the Infiniband architecture as the next generation of server I/O, with the intent of eventually replacing PCI.
2012-09-28 How to select PCB materials for high-frequency apps
Find out how to simplify that choice when striving for the best tradeoff between ease of fabrication and best electrical performance.
2005-08-30 Ansoft unveils high-speed serial interconnect design
Ansoft Corp. has presented a white paper unveiling the technical details of a new reference design flow for high-speed serial interconnect./
2006-07-31 Amtech tag gets RFID on the rails
This teardown looks at an RFID tag targeted specifically at the railroad industry, where managing a fleet of rail carsand tying the contents within to a specific locationis a critical task.
2008-09-19 Airwire antenna extends power transmission range
Wireless applications in the 2.4GHz band from remote controls to Zigbee industrial controllers to Wi-Fi nodes usually have to use a more powerful amplifier to expand their range.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top