Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > multiple input multiple output

multiple input multiple output Search results

?
?
total search1104 articles
2008-04-14 TI debuts PWM-input 20W Class-D power stage
TI says it has introduced the industry's first PWM-input 20W stereo Class-D power stage with closed-loop feedback
2007-12-05 Multiple-output controllers save space, cut BOM
Intersil Corp. has released a pair of multiple-output standard buck ICs that integrate critical power management functions to lower the number of components and save valuable board space
2006-02-28 USB data-acq modules synchronously sample multiple analog signals
Data Translation's DT9832 series of simultaneous analog input multifunction data acquisition modules for USB 2.0 offers 2 or 4 channels of simultaneous, 16bit analog measurement at ultra high throughput speeds up to 2MHz per channel
2006-03-27 Ultrawide-input quarter-bricks cut the need to inventory
Power-One's QMS quarter-brick DC/DC converters eliminate the need to inventory multiple brick part numbers for 70W to 82W wireless base station applications
2007-09-21 Tiny Class D audio subsystem touts high output power
Maxim Integrated Products has introduced a Class D audio subsystem that combines a mono Class D amplifier, a DirectDrive headphone amplifier and a DirectDrive mono receiver amplifier.
2005-11-28 TI's new unregulated DC/DC converter with 17V output
Texas Instruments' new 1W isolated, unregulated DC/DC converter operates from a 5V input and features dual 17V outputs
2008-02-27 TI debuts closed-loop, digital-input Class-D amp
TI claims the industry's first digital-input, 20W stereo Class-D speaker amplifier with closed loop feedback
2013-04-11 Temperature controller boasts 16 sensor input channels
MKS Instruments' MultiTherm 1000 temperature controller features 16 precision sensor input channels accepting RTDs and thermocouples, and provides 16 PWM output channels with built-in SSRs
2005-09-02 Sipex LED driver drives multiple LEDs from 16V input voltage rail
Sipex unveiled a linear constant current LED driver that is designed to drive multiple LEDs in series from a high input voltage rail (16V max
2008-10-03 Rouse future digital input designs
Modern digital input module designs require high-channel count, small form factor, low-power consumption and high data rates. Conventional designs using discrete resistor-diode networks are unable to match requirements due to high-power use and extensive component count. Instead, new innovative circuit designs such as digital input serializers exceed requirements and thus, lay the groundwork for future digital input designs
2015-04-10 Regulating multiple loops in power supply
While there can be some issues with regulating multiple loops, if you are able to understand the system constraints, you can come up with a strategy to make the power supply behave
2015-11-17 Reduce redesign risk with correct ADC analogue input
There are some choices that need to be made when deciding which converter is to be used for a particular application. Here we will explore the different available analogue input types
2006-09-21 Quad-output PMUs ease design and save space
National said the level of integration of its two new power management units simplifies system design and increases space efficiency in mid-range, quad-output applications
2007-11-22 Quad-channel buck converter has dual output
Linear Technology announces the LTC3562, a quad channel, high efficiency, 2.25 MHz, synchronous buck converter that can deliver dual 600mA and dual 400mA continuous outputs from a 3mm x 3mm QFN package.
2004-12-28 Quad DAC drives over 200V output
Goal Semiconductor's highly integrated D/A converter means compact system designs for high-voltage control apps.
2008-05-06 Programmable multi-output regulator targets UMPCs
STMicroelectronics has combined all supply-voltage and reference sources for a multimedia chipset and DDR2/3 memory into a single device by introducing the PM6641 multi-output regulator
2009-08-20 Optocouplers pack multiple current transfer ratios
Everlight has released three new families of 8-pin DIP optocouplers featuring high isolation voltage, low-profile surface mount availability, and 8mm external creepage distance.
2005-08-18 National's dc-dc converter provides wide input voltage range
National Semiconductor recently introduced a high power step-up dc-dc converter that features a wide input voltage range of 2.7V to 7V, a 0.15-ohm internal switch and pin selectable operating frequency
2005-05-27 Multiple-processor VME boards serve air-cooled MIL apps
The new VME boards from Mercury Computer Systems are primarily slated for high-end military apps.
2008-11-04 Multiple CAN bus network
This application note describes how to build a multiple CAN bus network by using AMIS-42700 or AMIS-42770
2008-08-25 Modulator transmits 4GHz RF output
Texas Instruments Inc. has announced a high-linearity, ultralow noise quadrature (IQ) modulator that delivers RF output transmission up to 4GHz, allowing service providers to easily support multiple wireless communications standards on a single RF transceiver card
2004-08-30 Maxim clock generator has 8kHz reference-clock input
Maxim Integrated Products unveiled a high-performance clock generator with an 8kHz reference-clock input
2011-04-25 Macro Sensors unveils 4-20mA output LVDT signal conditioners
Macro Sensors introduces mini-module single-channel signal conditioners with a low-noise 4-20mA output that supports process control and factory automation applications often requiring longer cabling facilities
2004-06-09 Linear Tech switch controller has output tracking
The new 2-phase two channel dc-dc step-down switching controller from Linear Tech comes with output tracking to ensure proper startup of multiple voltage systems
2007-05-23 Inverter controllers improve lamp's light output by 25
O2Micro new family of intelligent lighting products are claimed to enhance designs for new, single-stage, next-generation inverter modules that drive a CCFL backlight.
2008-01-31 Improve SNR in multiple ADCs
The constant innovation and development in the wireless communications field comes with a demand for faster and higher resolution high-speed data converters.
2012-06-05 Ideal diode controller tips negative input protection
The LTC4359 high voltage ideal diode controller targets harsh automotive environments such as during load dump, cold crank, two-battery jumps, and reverse battery connections.
2008-07-16 Hysteretic converters for multiple LED lighting
Hysteretic converters are used to drive LEDs in lamp replacement and emerging lighting applications. The ease of use and inherent stability of the topology make it a first choice for efficient inductive switching regulator solutions. The simple topology can be used in different configurations or other unintended external applications.
2002-08-16 Holtek microcontroller suits multiple LCD apps
The HT49C70-1 8-bit, single-chip microcontroller features a single-cycle, two-stage pipeline architecture and is suited for use in multiple, low-power LCD applications
2007-03-12 Getting more out of the ZXLD1350: high output current
The ZXLD1350 is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage. The device operates from an input supply between 7V and 30V and provides an externally adjustable output current of up to 350mA. In order to obtain higher output current to drive LEDs with higher power, a high current externally connected output stage is required.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top