Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > paper

paper Search results

?
?
total search2588 articles
1999-06-01 Noise, slew rate, and unity gain stability tradeoffs in high-speed amplifiers
This paper examines the tradeoffs that are made between noise, bandwidth, and slew rate during the design of high-speed bipolar operational amplifiers.
2002-03-16 Noise analysis catches hidden timing flaws
This technical paper discusses how with shrinking process technologies, designers must cope with escalating crosstalk noise effects that impact high-speed SoCs prior to manufacturing.
2001-08-09 Next generation router design for wire-speed packet processing
This conference technical paper discusses the process of accelerated packet processing that will make future routing devices robust enough to deliver wire-speed transmission.
2000-09-27 New technology for 1394b
This paper regarding 1394b includes a discussion of long distance and high-speed upgrades to the standard as well as back compatibility, arbitration and topology enhancements and improvements.
2015-09-02 New formulation cuts LED cost
The researchers claim in their paper that the energy savings of LED lighting has finally been balanced out against their cost by reducing the number of layers required from four or five to one.
2003-08-16 New Ethernet
This paper briefly discusses the evolution of the Ethernet technology, and how engineers can optimize the enhancements that stem from the original design.
1999-06-29 New capabilities of switched capacitor power conversion
This paper deals with switched capacitor technology with buck-boost capabilities suited to solve problems concerning high transient loads.
2005-12-26 New 14-channel CDC for handheld electronics from ADI
Analog Devices' new 14-channel CDC enables the design of contemporary touch controls that are paper-thin, yet highly reliable, to improve the user experience.
2000-05-03 Networked multimedia appliance software ingredients for success
This paper discusses the advantages of distributed RTOS and windowing system technologies, such as shortening edit-compile debug cycles, cutting maintenance & verification, enabling the reuse of field-tested code across multiple products, upgrading installed systems on the fly, and developing hardware and software platforms concurrently.
2001-07-02 Network Processing In Cost Sensitive Applications
This paper provides an abstract that explains the need for flexibility of CPU-based solutions due to the commoditization and consumerization of a new breed of network devices.
2004-06-16 NEC engineers advance HW/SW co-verification
Claiming a new approach to hardware/software co-verification, researchers from NEC presented details about a combined simulation and emulation system at a Design Automation Conference paper session here.
2004-06-16 NEC engineers advance HW/SW co-verification
Researchers from NEC presented details about a combined simulation and emulation system at a Design Automation Conference paper session.
1999-10-23 MXI-3 expands possibilities for data acquisition and embedded systems applications
The paper presents three examples of data acquisition and embedded systems applications that benefit from the performance and flexibility of MXI-3.
2000-09-27 Multi-view 3D display system using IEEE1394 digital interface, part 2
This is the second part of a paper that presents the results of a multi-view 3D display system based on temporal multiplexing mechanism using IEEE1394 digital Interface.
2000-09-27 Multi-view 3D display system using IEEE1394 digital interface, part 1
This is the first part of a paper that presents the results of a multi-view 3D display system based on temporal multiplexing mechanism using IEEE1394 digital Interface.
2004-04-22 Multi-phase synchronous-boost converter solutions for portable applications
This paper discusses the advantages of multiphase synchronous boost topology, and addresses issues in low inrush current, output disconnect during shutdown, as well as short-circuit protection.
1999-06-29 Multi-functional communication device for various data networks
This paper describes a flexible design model of communication device for interfacing with various data networks, including 56Kbps PSTN access, 64/128Kbps ISDN access, 10Base-T LAN access, and GSM access.
2000-06-01 Multi-channel data acquisition system
The paper aims to establish a synergy for achieving a high level of analog performance, while keeping system complexity low. An 8-channel system provides several orders of magnitude of improvement over a single channel data acquisition system.
2002-08-01 Moving classification and forwarding to OC-768
This technical paper discusses how innovative solutions are required to operate with the innovative OC-768 system.
1999-09-09 MOSFET selection for cellular phones
This paper focuses on the cellular phone and discuss the various Power MOSFETs offered in the market for cellular phone application and the trend toward application specific MOSFETs. Elements in power management, power conversion are discussed in relation to the selection of the most appropriate and cost-effective MOSFET.
2003-09-16 More prototyping tips
This paper discusses how to use the Borland C++ Builder in developing a virtual user interface on a PC.
2015-10-26 More info on FinFET ReRAM unveiled
A full paper is due to be presented on a 1Kb memory array of devices using a 16nm logic FinFET manufacturing process at this year's IEDM coming up in December.
2003-06-01 Modeling and simulation of an OFDM WLAN receiver
This paper presents a behavioral modeling and simulation approach for OFDM WLAN receiver designs that is capable of handling s-parameter descriptions for RF building blocks and digitally-controlled AGC feedback.
2000-07-01 Mobile phone design verification
Modern mobile phones are remarkable for their features and capabilities. As the capabilities of these devices improve, so does the complexity of the design. This paper describes the application of digital design test equipment in the verification of mobile phone RF, IF and signal processing stages.
2000-05-03 Migrating from 1394 "a to b"
This paper addresses the changes made to the 1394-1995 standard in 1394a. The latter section of the report discusses the 1394b, which includes a discussion of long distance and high-speed upgrades to the standard.
2006-03-10 Micrel discuses dual mode power management solution at IIC-China
Micrel Semiconductor presented its technical paper entitled "Power Management for Mobile Products" at the 11th Annual International IC-China Conference & Exhibition this week.
1999-10-09 Metastable Recovery
This paper deals with the XC4000 and XC3000-series flip-flops and how they perform well in metastable conditions for MSI and PLDs.
2009-03-31 MEMS on-wafer evaluation in mass production
This paper will discuss how to evaluate MEMS elements at the on-wafer stage in order to lower the total production cost.
2004-04-22 Mega pixel camera for mobile phone
This paper addresses the design challenges of mega pixel camera phone design, the engineering tradeoffs of various development approaches and the current trends in mega pixel camera phone design.
2010-08-30 Meet Bobcat and Bulldozer
AMD presented Bulldozer and Bobcatthe company's first new x86 cores designed from a clean sheet of paper in 10 yearsat the Hot Chips conference last Tuesday. The cores are key to AMD's competitive strategy against archrival Intel.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top