Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > pin termination

pin termination Search results

?
?
total search266 articles
2007-02-02 Higher-density SFP+ supports 10Gbps
Molex has released its SFP+ Interconnect System, which meets the next-generation SFF 8431 specification and supports 10Gbps speeds using the same port space as a standard SFP system.
2007-08-16 HDMI/DVI cable devices offer 15dB signal-loss compensation
Maxim has introduced the MAX3814 TMDS digital video equalizer and cable driver for HDMI and DVI applications that provides 15dB of signal-loss compensation for long cables.
2007-11-20 HDMI switch supports 3.4Gbit/s for 16bit color
STMicroelectronics has unveiled what it touts to be the first HDMI switch to support a video data-transfer rate of up to 3.4Gbit/s, enabling full 16bit color depth for a true high-definition picture.
2006-08-11 Gigabit Ethernet transceivers ignite port-count explosion
Ethernet's expanding bandwidth requirement is driving switch-router equipment designers to build scalable systems.
2006-08-11 Gigabit Ethernet transceiver ignites port-count explosion
Ethernet's expanding bandwidth requirement is driving switch-router equipment designers to build scalable systems.
2006-03-06 Gigabit Ethernet PHY breaks the logjam
Vitesse Semiconductor Corp. announced the 600mW VSC8601 and VSC8641 GbE PHYs.
2008-05-20 Gate driver boosts robustness, reliability in motor drives
International Rectifier has introduced a rugged 600V three-phase gate driver IC for low-, mid- and high-voltage motor drive applications.
2006-01-05 G.984-compliant transceiver features clock and data recovery
Applied Micro Circuits entered the Gigabit Passive Optical Network market with the release of its G.984-compliant transceiver with clock and data recovery.
2009-07-20 Front-end ultrasound IC packs CWD beamformer
Maxim Integrated Products has developed the MAX2078, touted to be the lowest power, octal, ultrasound front-end solution with integrated mixer-based continuous-wave Doppler (CWD) beamformer.
2007-08-21 Four-channel LIN transceiver lowers system costs
The MLX80001 LIN transceiver from Melexis can significantly reduce system costs of the LIN PHY by 20 percent compared to multiple single transceiver ICs.
2003-08-07 FMA rolls low-power dual PLL frequency synthesizers
A series of dual PLL frequency synthesizers, featuring power supply current as low as 2.5mA at 2.7V, is available from Fujitsu Microelectronics America.
2009-12-18 Flash MCU ups impedance matching at low power
Atmel Corp. has launched the SAM3S series of 18 general-purpose Cortex-M3 based flash microcontrollers that improve impedance matching, simplify PCB design and save 50 percent power.
2007-03-01 Fine tune POL regulation in DTVs
Here is a tutorial focusing on the different power needs of the new batch of DTVs being developed.
2008-03-17 Fanout switch chipset targets HDMI, DVI apps
Maxim Integrated Products has introduced the MAX3845/MAX4814E 2:4 fanout switch chipset for HDMI and DVI applications.
2007-06-21 Fanout buffers prevent unwanted oscillations
The SY89467U and SY89468U from Micrel are optimized to prevent unwanted oscillations and maintain output stability when an input signal's swing collapses or disappears.
2013-12-30 Examining JESD204B converter protocol advances
JESD204 was originally rolled out several years ago, but it has undergone revisions that are making it a much more attractive and efficient converter interface.
2005-08-26 ERNI rolls out board-to-cable connectors with 2.54mm pitch
ERNI's LPV family of IEC 60603-13 (DIN 41651) compliant connectors offers a comprehensive spectrum of board-to-cable connectors with a 2.54mm pitch.
2005-10-07 ERNI connectors target apps in automation industry
ERNI's new M8 male and female connectors can be used to build a flexible I/O-connection on the circuit board.
2007-10-26 ERNI completes ERmetZD connector line
ERNI Electronics has added new right-angled female connectors in 2, 3 and 4 contact pair versions to complement its ERmetZD range of straight male connectors and right-angled female connectors.
2014-09-02 Enable low-cost isoSPI coupling for battery systems
By using an AC-coupling method, we can eliminate the double insulation requirement, and therefore mitigate the cost impact of high voltage isoSPI systems.
2006-03-27 Elpida's 512Mbit XDR DRAM devices operate at 4GHz data rate
Elpida's new 512Mbit XDR DRAM devices operate at 4GHz data rate and provide a data transfer rate of 8GBps within a single device for digital consumer electronics apps.
2007-04-19 Dual, quad ADCs promise high speed, low power
TI unveiled a new family of two- and four-channel 12bit and 14bit ADCs featuring high speed, low power and high performance housed in tiny 9-by-9mm packages.
2013-09-16 Drive high-power LED, charge high-voltage battery
Here's a look at a 60V buck-boost controller that delivers 100W to LED headlights or a battery stack.
2007-11-09 DRAM makers ready for DDR3 demand surge
Major players in the memory sector are gearing up to supply the electronics industry when demand for DDR3 SDRAM kicks in next year.
2005-02-11 Differential receiver handles up to 4GHz handling clocks, 3.2Gbps data streams
The SY89850U from Micrel is a 2.5V/3.3V precision, high-speed, differential receiver capable of handling clocks up to 4GHz and data streams of up to 3.2Gbps.
2008-01-16 Design versatile high-speed ADCs
The high-speed ADC is the bridge between the analog and digital hardware, and many times it is placed in the responsibility of an all-digital or all-analog hardware designer. When that happens, the programmability has easier acceptance with the digital hardware designer, but it can save the day for an analog hardware designer who failed to set up the digital timing or signal integrity properly.
2005-05-02 Dallas unveils 'very versatile' battery-pack charge controller
Dallas rolled out a versatile NiMH, battery-pack charge controller that can be optimized for a variety of charging scenarios for either removable or embedded battery packs containing one to 10 NiMH cells in series.
2004-05-04 Dallas transceivers connect four T1, E1, J1 lines
Dallas has disclosed that its 4-port transceivers are the only devices that do not require external component changes to switch among T1, E1, and J1 standards.
2004-05-04 Dallas transceivers connect four T1, E1, J1 lines
Dallas has disclosed that its 4-port transceivers are the only devices that do not require external component changes to switch among T1, E1, and J1 standards.
2008-05-08 Current-sensing power MOSFETs
Vishay Siliconix current-sensing power MOSFETs offer a simple means of incorporating a protection feature into an electronic control circuit and avoiding catastrophic failures resulting from overcurrent (overload) and/or short-circuit conditions.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top