Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > plated through-hole

plated through-hole Search results

?
?
total search40 articles
2005-08-24 Surface-mount IDC terminal replaces through-hole version
EDAC developed a new surface-mount technology IDC terminal to replace a through-hole soldered wire joint, resulting in significant cost savings particularly for miniature PC-boards used in automotive apps
2004-10-01 Modeling, verification of backplane press-fit vias
Look at active and passive components of a system differently to push higher data rates through backplane channels.
2012-09-28 How to select PCB materials for high-frequency apps
Find out how to simplify that choice when striving for the best tradeoff between ease of fabrication and best electrical performance.
2000-10-01 Effects of NEMI reflow on PTHs
This paper evaluates the changes in plated through-hole (PTH) performance and laminate material properties for several epoxy-based laminate systems caused by the thermal reflow requirements of the NEMI higher temperature alloy.
2012-04-25 Compliant-pin tech targets automotive apps
Molex's EON1.0, EON1.45 and EON1.80 connectors can be used on both the soldered and component sides of the PCB, allowing double-sided PCB assembly.
2000-12-04 Thermal & reliability study on high-current thermal vias & output pins
This application note addresses concerns raised with regard to pin and board heating when high currents are driven through thermally relieved plated through-hole (PTH) vias.
2004-03-10 Three Sun PCB has 500-by-500mm board size
Three Sun's gold-plated full-function double-sided PCB has FR4 base laminate materials and liquid photo imageable dry film solder mask
2004-03-01 Three Sun PCB has 500-by-500mm board size
Three Sun Enterprise has released its Double-10 gold-plated full-function double-sided PCB with FR4 base laminate materials
2006-04-05 Sealed switches operate up to 1M cycles
CIT Relay & Switch launched the ST series of through-hole tactile switches for a broad range of applications
2010-04-13 Detect switch boasts reliable contact design
C&K Components has released a series of through-hole subminiature detect switches that features a highly-reliable contact design with a minimum electrical life of 10,000 actuations at full load
2002-10-29 A Point IC socket withstands 600V
The 101 series of through-hole PLCC IC sockets is capable of handling a current of 1A and can withstand up to 600V
2005-09-26 Teradyne's single-ended connector touts highest density, speed
Teradyne has unveiled its new Ventura high-speed, high-density connector, which the company claims to be the fastest single-ended interconnect with the most signal pins per inch of any connector available today.
2007-12-20 SMT DC/DC converters ease assembly
Ericsson Power Modules has released three surface-mount versions of its PKU series of DC/DC converters that are designed to make product assembly easier.
2007-03-16 Signal-integrity issues plague multigigahertz era
Engineers want a new bag of tricks to manage signal integrity as data rates soar into multigigahertz territory.
2004-07-06 Sanmina-SCI, Agilent develop new x-ray technique for PCBAs
Agilent Technologies Inc. and Sanmina-SCI Corp. have revealed a new technique for rapidly generating high-resolution, sub-surface 3D scans of complex multilayer backplane and printed circuit board assemblies (PCBAs).
2005-02-02 Molex reference backplane demos a 1m, 10Gbps channel
The new GbX FR408 Reference Backplane Demonstrator from Molex demonstrates a true 1m, 10Gbps NRZ channel.
2004-01-13 Jinling multilayer PCBs offer 220-by-150mm board size
Shanghai Jinling Co. Ltd has developed the ML-PCB multilayer PCB that features a photo liquid imageable solder maskand nickel- and gold-surface plating.
2014-02-14 How much power can you derive from a brick?
Find out how much power may be extracted from a power brick.
2009-03-13 Ease real-time solder joint fault detection in FPGAs
Without early detection, electrical anomalies caused by solder joint faults can result in the catastrophic failure of mission-critical equipment.
2005-06-01 Driving 10Gb Serial ATCA backplanes
The Backplane Ethernet Task Force is focused on developing three new PHYs: 1000BASE-KX, 10GBASE-KX4 and 10GBASE-KR
2008-04-10 DNP, Unimicron to put up printed wiring board JV
DNP and Unimicron Technology have agreed to establish UD Alliance Technology in Hong Kong, which will specialize in the manufacturing and marketing of printed wiring boards based on B2itTM DNP's unique buildup board manufacturing technology.
2014-07-07 Artesyn intros 85W, 1/16th brick DC-DC converters
The AVD85 claims to deliver excellent thermal performance, high power density of 72.5W/in2 and boasts peak efficiency of 92 per cent.
2005-06-21 Tyco's new PCB receptacles allow board to board connection
Available for vertical or horizontal mounting, the HV100/190 family of PCB receptacles from Tyco Electronics provides a comprehensive solution for board to board connections.
2002-01-18 Tyco wire-to-board interface comes in single-row version
The AMP Micro MATE-N-LOK soft-shell connector system features single-row, 3mm pitched contacts with a maximum rating of 250V and 5A.
2006-03-23 Tactile switches housed in small package
CIT Relay & Switch has introduced the STJ series of sealed tactile switches in a small 7.2-by-7.2mm package.
2006-01-17 Spring-loaded connectors offer variety
Mill-Max has expanded its spring-loaded connector line to include three families of single- and double-row strip assemblies and 31 discrete contacts.
2011-12-01 Spring pins tout 3A max current rating
Mill-Max spring pins feature 2A continuous current rating and target board-to-board or device-to-board connections.
2009-06-01 Solid tantalum capacitor fit for harsh setups
AVX Corp. has developed a SMD solid tantalum capacitor that delivers 1,000 hours of continuous operation at 200C with derating.
2010-04-20 Rotary switches provide laser marking
C&K Components has developed a RTE series of DIP switches that feature SPDT, SP3T and SP4T rotary functions as well as rotary binary-decimal and hexa-decimal coding.
2012-02-15 Resistor network touts 0.05% ratio tolerance
The thin film MIL-PRF-83401 features low absolute TCR of 25ppm/C and TCR tracking of 5ppm/C.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top