Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > receivers

receivers What is a digital radio receiver? Search results

What is a digital radio receiver?
A digital radio receiver is a device that accepts and converts radio signal to a digital stream.
total search1364 articles
2012-04-09 IR receivers operate on 26.2kHz carrier frequency
Compliant to 3DTV CEA-2038, the TSOP75D26 and TSOP35D26 are designed to be assembled into active 3D glasses, delivering 830nm peak wavelength sensitivity.
2010-08-05 IR receivers built for 3D TV glasses
Vishay Intertechnology Inc. has released a pair of infrared receivers developed specifically for the LCD shutter glasses used with 3D-ready TV sets.
2007-06-12 Intersil RS-232 transmitter/receivers provide high speed, 15KV ESD protection
The Intersil family of high-speed, 15kV ESD-protected devices (HIN202E - HIN241E) features high speed ISDN-compatible operation and offers a wide variety of RS-232 transmitter/receiver combinations to suit various app.
2009-01-22 Interfacing LVPECL 3.3V drivers with Xilinx 2.5V differential receivers
This application note describes how to interface 3.3V differential LVPECL drivers with Xilinx 2.5V differential receivers.
2003-12-01 Integrating GPS receivers with passive antennas
The impact of the direct integration of passive antennas on the GPS system performance is analyzed. The low-gain low noise radio front-end stage, the low levels of inter-system interference and the optimum loading of the analog-to-digital converter enabled the direct connection between the GPS radio and the passive antenna with high sensitivity.
1999-12-04 Increasing system ESD tolerance for line drivers and receivers used in RS-232 interfaces
In order to identify the source and type of EOS, a number of DS14C88 and DS14C89A devices were subjected to controlled Electrostatic Discharge - ESD (Electrostatic Discharge) events in the lab using a KeyTek Human Body ESD Simulator. Additional units were tested with PolyClamp ESD protection devices to determine their effectiveness and to demonstrate a possible solution for providing greater system ESD tolerance.
2004-04-15 In-Stat/MDR sees bright future for DTV receivers
In-Stat/MDR forecasts that DTV receiver unit shipments will reach 93 million units in 2008, up from 17 million units in 2004.
2013-04-29 Implementing squelch in ISM-RF receivers
Know how to implement squelch in an amplitude-shift keying/on-off keying or frequency-shift keying system.
2007-09-03 Implement DTV receivers with cost-effective demodulator
The DTV market is growing fast, and system developers continue the search for more cost-effective ways to implement DTV receivers without sacrificing picture quality. TI's TVP9900 ATSC demodulator offers a high-performance receiver front-end solution with multipath performance.
2006-12-06 IF detector IC targets multifunction wideband receivers
New Japan Radio has announced an IF detector IC with an integrated FM/AM detector circuit for use in multifunction wideband receivers.
2008-01-17 IC upgrade of IR receivers doubles sensitivity
IR receivers from Vishay Intertechnology Inc. are getting an upgraded IC that doubles the sensitivity of the device under low-light conditions.
2003-10-23 Hosiden receivers suit cellphone designs
Hosiden Corp. has announced the availability of its HDR2114 and HDR2158 small receivers that are designed to suit cellphones.
2010-07-27 High-sensitivity, low-power wireless receivers support multiple protocols
Infineon Technologies introduces an enhanced family of three wireless control receivers offering the highest current available sensitivity and low power consumption. These controllers also provide multi-band support and capability for use in various automotive applications.
2005-12-28 GPS receivers streamline embedded development
NavSync's new GPS receiver modules are manufactured in a surface mount format, with an embeddable architecture that is designed to allow easy integration into host systems.
2012-04-26 GNSS receivers target GIS, mobile mapping
The Trimble Pro 6H and Pro 6T receivers claim to be rugged and built to withstand the rigors of long hours in tough outdoor conditions.
2007-02-20 GNSS receivers add position location to handsets
SiGe Semiconductor announced the SE4120S and SE4110S global navigation satellite system receiver ICs allowing designers to support position location capabilities in mobile handsets.
2014-08-01 GigOptix delivers dual-mode GNSS RF receivers
The EXG0201 marks the introduction of GNSS RF receivers by GigOptix. It is a low-power consumption, highly linear RF GNSS receiver in a small Quad Flat No-Lead package.
2011-12-29 FM receivers operate as standalone TMC receivers
The devices cover a broad band spectrum from 76 to 108MHz, used across Europe, Japan and the U.S.
2003-03-04 Faratronic PPF capacitors fit monitors, color TV receivers
The CBB81B PPF capacitors of Xiamen Faratronic Co. Ltd are available with voltage ratings of 1.6kV and 2kV, and are designed specifically for use in horizontal resonance circuits of large-screen monitors and color TV receivers.
2001-04-26 Extracting linear and non-linear k-models of RF receivers
This application note describes how to extract linear and non-linear K-models of an RF receiver, and instantiate and test a K-model in SPW (Signal Processing Worksystem) DSP tool.
2006-10-31 Eureca sees continued growth of DAB receivers
The installed base of digital audio broadcast receivers in the United Kingdom now exceeds 3.5 million and receiver sales are increasing rapidly in several other European countries.
2004-07-19 Ericsson receivers GSM expansion contract in China
Ericsson will provide Hubei Mobile Communications Co. Ltd with equipment and telecom services for the company's GSM network expansion in Hubei, China.
2008-07-11 Emcore gets $29M purchase order for solar cell receivers
Emcore Corp. has entered into two definitive supply agreements for solar cell receivers in June for $29 million.
2004-11-24 Effective IM2 products estimation for two-tone and W-CDMA modulated blockers in 3GPP direct conversion receivers
This app note presents a commercially available, fully integrated zero IF receiver solution for 3G radios.
2007-02-08 DVB-H receivers bring TV to mobile phones
DiBcom is sampling two receivers that enable mobile TV broadcasts in mobile phones.
2011-04-29 Dual mixers reduce power use and size for 4G MIMO receivers
Linear Technology's LTC559x family of high dynamic range dual downconverting mixers help reduce power consumption for 4G MIMO receivers.
2002-11-29 DTMF Receivers.
This application note provides information on the operation and application of
2008-12-25 Digital receivers tout speedy conversion
Mercury Computer Systems has announced the availability of the initial offering of the new Echotek Series family of high-performance, Virtex-5 FPGA-based digital receivers that allow high-speed/high-resolution data conversion.
2003-07-01 Designing low-cost CDMA front-end receivers
The constant pressure on RF design engineers to come up with low-cost RF solutions are remedied by RF Micro Devices' RF2870 small CDMA LNA/Mixer.
2004-06-01 Designing IF filter circuits for communication receivers
The article discusses the circuit design of an IF filtering circuit used in digital communication receivers.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

Back to Top