total search596 articles
| 2003-10-01 | Using ADC with resistive touchscreens This paper describes how to wire the touchscreen to the ADC, and how to design the system software to interact with the ADC. |
| 2015-10-05 | Using 16nm FinFET as a resistive memory device An IEDM paper is set to demonstrate that hafnium-dioxide high-k dielectric material, which is used in the high-k metal gate (HKMG) of a 16nm FinFET, can also be turned into a ReRAM device. |
| 2004-12-06 | Touch screen control and calibration -- four-wire, resistive This app note describes two control methods and a calibration algorithm for a four-wire, resistive touch screen using the PSoC device. |
| 2014-08-01 | Testing resistive memory devices In this instalment, we will address issues related to characterisation and forming, as well as endurance testing for 1R ReRAM structures. |
| 2010-05-12 | Signal conditioner suits resistive bridge sensors ZMD AG is offering the ZSSC3017 16bit sensor signal conditioning IC (SSC) for resistive bridge sensors. |
| 2011-11-30 | Sensor signal ICs target resistive bridge conditioning Sensor system designers can select among four pin-compatible products to obtain the best fit in terms of sensor type, system safety and module cost requirements. |
| 2012-04-11 | Resistive RAM based on silicon dioxide Researchers have developed a resistive-switching memory device based on silicon dioxide that shows a simpler material structure compared to those using metal-oxide films. |
| 2005-08-05 | Resistive devices withstand up to 200°C New TaNFilm high-temperature product lines from TT electronics IRC Advanced Film help maintain critical electrical characteristics in high-temperature applications. |
| 2005-06-06 | Resistive bridge basics-Part one This app note details key concerns of bridge-circuit applications such as noise, offset voltages and offset voltage drift, common-mode voltage, and excitation voltage. |
| 2011-11-17 | Piezo-resistive bridge sensors enable cost-optimized apps Sensor system designers can select among four pin-compatible products to obtain the best fit in terms of sensor type, system safety and module cost requirements. |
| 2014-09-29 | Online monitoring of resistive power load (Part 2) As we have already tackled the models and topologies for continuously monitoring the resistance of power load in Part 1, we will now look into interesting cases and examples. |
| 2014-09-23 | Online monitoring of resistive power load (Part 1) This article series tackles the models and topologies for continuously monitoring the resistance of the power load without disturbing system's normal operation. |
| 2015-04-22 | Is resistive RAM the next NVM star? Resistive RAM features low power consumption and a small cell area—both compelling reasons for their adoption as a non-volatile memory. |
| 2007-10-01 | Good strategies for a low-power resistive touchscreen Engineers are increasingly designing touchscreens into portable devices. This article discusses the construction of a resistive touchscreen panel and the inner workings of a typical four-wire resistive screen. It also discusses some hardware low-power strategies. |
| 2014-07-24 | Fundamentals of resistive memory devices In this article, we address the basics of resistive random access memory(ReRAM) structures, as well as the test hardware available to characterise them. |
| 2003-04-16 | Elo resistive touchscreens eye mobile apps Elo TouchSystems Inc. has released the AT4 series of resistive touchscreens that are targeted for integration into mobile devices and wearable computers. |
| 2012-04-09 | Advantages of resistive RAM for next-gen NVM Here's a discussion on the strengths of hafnium-oxide-based resistive RAM cells, and the main challenges ahead for this technology. |
| 2008-08-27 | 4-wire and 8-wire resistive touch-screen controller using the MSP430 This TI application note describes how to use an MSP430 MCU to drive and read a resistive touch screen. |
| 2010-04-16 | When will memristors be ready for prime time? While memristors represent a potential revolution in electronic-circuit theory akin to the invention of the transistor, it will take a killer application to get it off the ground. |
| 2008-05-16 | Vishay tips ultrahigh-precision voltage divider Vishay's new ultrahigh-precision SMT flip-chip voltage divider is built on the company's 'Z- foil' technology, which reduces the resistive component's sensitivity to ambient temperature variations and applied power changes. |
| 2007-05-04 | Using GMR sensors with the MSP430 scan interface This application report describes implementation of a rotation detector that uses a pair of giant magneto-resistive (GMR) sensors, which can detect magnetic fields. The sensors are positioned such that they do not use a quadrature signaling sequence, and this provides an opportunity to discuss how the SIF can be configured for non-quadrature situations. Techniques for debugging SIF applications are discussed, and a tool is provided for designing non-quadrature processing state machines. |
| 2009-08-07 | Touchscreen controllers pack built-in decoding Microchip Technology Inc. has launched the mTouch AR1000 resistive touchscreen controllers, giving embedded designers the flexibility they need to quickly and easily implement analog resistive touchscreen interfaces. |
| 2012-02-23 | Touchscreen controller integrates 12bit SAR ADC The KTF7793 from ICdidik LAB features complete on board switches that have very low on resistance allowing for direct driving of resistive touchscreens. |
| 2011-08-19 | Touchscreen controller features advanced calibration The mTouch AR1100 offers advanced calibration capabilities as a USB mouse or single-input digitiser. |
| 2007-08-13 | Touch panels operate under extended temperature range Fujitsu Components America has added three extended temperature range products to its standard off-the-shelf, resistive touch panel offering for automotive and industrial applications. |
| 1999-06-29 | The role of touchscreens in portable devices This paper shows how proper, up-front planning of the user interface, as well as careful attention to hardware and software design details, greatly enhance overall performance and usability of touchscreen devices. |
| 2014-11-04 | The lowdown on manufacturing RRAM Resistive memory technologies involving simple two-terminal devices can be incorporated into backend metal layers to provide an elegant solution for meeting density, capacity and cost challenges. |
| 2002-02-01 | Synaptics inks sales agreement with Bourns Synaptics Inc. has entered into an agreement with Bourns Inc. in which Synaptics will assume responsibility for the sales and marketing of the Bourns resistive pointing stick product line. |
| 2008-12-15 | Study: it's a touchscreen world for mobile phones According to ABI Research, the most important single factor supporting the continued use of resistive screens is the huge opportunity in the Asian market and its need for screens that support handwriting recognition input with a stylus. |
| 2009-02-11 | Startup readies RRAMs for mass production Australian startup 4DS Inc. claims to have made a major breakthrough in resistive RAM (RRAM) technology. |
Bloggers Say
See what engineers like you are posting on our pages.
All rights reserved.