Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > routing

routing Search results

?
?
total search1415 articles
2000-11-28 Solutions to current high-speed board design
This application note will help a designer ensure proper termination, placement, routing and stacking of a high-speed board to ensure proper data transfers between the microprocessor, cache, main memory and expansion busses.
2001-06-22 Solution space analysis for high-speed design
Up-front SI analysis can drive placement and routing while providing a viable alternative to the old "route-analyze-fix" approach of yesteryear.
2004-05-14 Silicon modeling in the nanometer era
With 90nm in production and 65nm on the horizon, designs face increasing challenges: finer line widths, longer interconnect, more routing layers and more analog content.
2008-05-01 Sign-off smartly with SSTA
At the 45nm process node, the SSTA approach to sign-off will allow designers to mitigate the effects of process variation, prevent silicon failures, and meet the demands of cutting-edge electronic design for the near future. It will usher in the much-anticipated "electrical DFM" that provides multi-objective placement, physical synthesis, and routing optimization while comprehending the full spectrum of physical and electrical implications of manufacturing.
2008-09-15 Sify taps Cisco to deploy IP-NGN in India
To enhance its core network offering and to address the rapidly evolving India market, India's Sify Technologies Ltd has selected Cisco Systems' CRS-1 Carrier Routing System as the foundation of Sify's Internet Protocol next-generation network.
2001-05-16 Sequence Design offers tool for timing closure
Sequence Design has combined different technologies in a "design closure" product that can optimize timing and signal integrity concurrently before and after routing.
2000-09-01 Recommended design methods
This application note describes a series of guidelines, such as basic cell functionality, building simple functions, general manual placement-and-routing rules and schematic-entry tips, for designing with the AT6000 Series of FPGAs.
2000-08-28 RC effects in nets
This application note explains how RC effects can occur and be modeled in nets. This is of particular importance when planning the routing and track width of clock nets.
2007-02-19 Power supply, ground design for WiFi transceiver
This application note addresses the fundamentals of board stack-up, supply routing, and grounding and offers some practical, design-proven guidelines on power supply routing, supply bypassing, and grounding techniques to maximize the performance of any RF design.
2013-08-08 Peripheral hub as backbone of efficient SoC design
Know the ways to integrate digital, analogue, routing, and interconnect sub-systems into an ARM-based SoC embedded system.
2004-01-12 PCT selects Linux-based mobile comms infrastructure
Prime Creation Technology (PCT) Ltd. has chosen eXtremeDB in-memory embedded database from McObject for real-time call routing in new Linux- and Web Services-based technology for mobile network operators and wireless apps service providers.
2007-03-12 PCIE series Final Inch designs in PCI Express applications generation 1-2.5Gbps
A single Samtec PCIE Series through hole connector in a board-to-edge card configuration can be used in PCI Express systems with total trace lengths not to exceed 13.9 inches when used with Samtec's Final Inch outing, breakout, and trace width solutions. Because loss is the dominant contributor to system degradation, designers should be aware that using smaller trace widths, laminates with higher loss tangent, and sub optimal routing solutions with higher pair-to-pair coupling and additional via stubs will decrease overall performance and the maximum allowable trace length.
2001-09-16 Partitioning and laying out mixed-signal PCBs
Component placement and partitioning, combined with routing discipline, are the keys to success in laying out a mixed-signal PCB梟ot the isolation of the ground planes.
2006-07-19 Oki adopts Pulsic's tech for custom LSI designs
Oki Electric and Pulsic announced that Oki has adopted Pulsic's routing and full interactive editing technology, which is designed to handle Oki's custom LSI layout designs.
2006-06-30 NI unveils 'highest-voltage' PXI switch module
National Instruments has announced a PXI switch module capable of routing signals up to 600V, touted to be the industry's highest.
2001-08-09 Next generation router design for wire-speed packet processing
This conference technical paper discusses the process of accelerated packet processing that will make future routing devices robust enough to deliver wire-speed transmission.
2001-10-01 New developments in place-and-route
New software technologies such as free angle routing and 3D placement will increasingly become part of the board designer's toolkit to handle the new hardware technologies of microvias and high-density integrated systems on a single chip.
2004-05-28 New AirMax VS connector addresses cost issues
FCI's new AirMax VS high-speed shieldless connector addresses cost reduction by expanding routing options and reducing backplane and daughtercard layers.
2006-03-02 NetLogic, Broadcom team on packet processing
NetLogic is collaborating with Broadcom to provide Ethernet routing solutions to the carrier market, enabling carriers to launch services based on Ethernet communications technology.
2011-03-17 Multicore Association releases MCAPI spec 2.0
The Multicore Association releases version 2.0 of its multicore communications API specs defining new features, such as domains for routing purposes.
2004-10-01 MSE wins over edge routers
Here's why a properly architected MSE device offers distinct advantages over traditional edge routing technology.
2008-07-17 Midspeed apps get performance boost from circuit jumpers
Samtec Inc. is offering standard flex circuit data links in a choice of 0.05-inch (1.27mm) or 2mm pitch, and single-ended or differential pair signal routing, together with a variety of end assembly options.
2005-03-04 Maxim Serdes with DC-balanced outputs
Maxim's new Serdes products serialize 27 lines into a single DC-balanced twisted pair or differential line for improved EMI and low-cost routing.
2010-12-09 Magma preps Talus IC implementation tool for 20nm
The company claims Talus ver.1.2, a tool for routing, timing and extraction for SoC implementation enables engineers to implement 1 million to 1.5 million cells per day.
2005-09-27 LVDS and LVPECL repeater, translator with 45ps total jitter
Featuring low total jitter of 45ps, the new 4Gbps low-voltage differential signaling (LVDS) and low-voltage pseudo emitter-coupled logic (LVPECL) repeater and translator from Texas Instruments Inc. (TI) help ensure signal and clock integrity in various communications applications, including high-speed network routing, wireless base stations and 622MHz central office clock distribution, and they can also serve as translators in an array of consumer applications.
2000-04-13 Low voltage power supply circuits
The application note describes the use of voltage regulator circuits that provide programmable voltage range of 3.3V to 3.6V. It includes filtering and routing guidelines for incorporating such circuits into a motherboard design.
2008-07-01 IP standards to Roll for sensor nets
Aiming to define a spec for Internet Protocol as early as June next year, the IETF's Routing over Low-power and Lossy Networks (Roll) group is pursuing a standard way for control and sensor nodes on Bluetooth, Wi-Fi and 802.15.4 nets to link to the broader Internet.
2004-02-18 Intersil regulator IC reduces space, BoM cost
The power regulator ICs from Intersil are designed to provide reduced BoMs, manufacturing costs, board space and routing problems.
2001-12-01 Intelligent tests for optical designs
This technical article discusses how optical communications engineers can learn from standard routing and signaling tests when working with fast switch fabrics.
2013-03-15 Industrial switching router geared for M2M apps
The AR530 from Huawei integrates multiple functions such as routing, switching, security and data collection.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top