Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > select ram

select ram Search results

?
?
total search91 articles
2000-06-21 XC4000 series edge-triggered and dual-port RAM capability
This application note examines the edge-triggered capability of the XC4000 FPGAs to simplify system timing and provide better performance for RAM-based designs. It also discusses these FPGAs' dual-port mode, which offers new capabilities and simplifies FIFO designs
2000-06-21 Using Select-RAM Memory in XC4000 Series FPGAs
This application note describes how to implement Select-RAM memory in XC4000 Series design: in schematic entry, MemGen memory block generator, X-BLOX schematic-based synthesis, and HDL-synthesis environments. It also describes specifying timing requirements, evaluating performance and floorplanning.
2000-06-21 Using Select-RAM Memory in XC4000 Series FPGAs
This application note describes how to implement Select-RAM memory in XC4000 Series design: in schematic entry, MemGen memory block generator, X-BLOX schematic-based synthesis, and HDL-synthesis environments. It also describes specifying timing requirements, evaluating performance and floorplanning.
2000-06-21 Implementing FIFOs in XC4000 series RAM
This application note demonstrates how to use the various RAM modes in XC4000 series logic blocks. A simple FIFO is implemented in several different ways, using combinations of level-sensitive (asynchronous) and edge-triggered (synchronous), single-port and dual-port RAM
2010-06-11 STT-RAM geared to displace DRAM, flash
Grandis Inc. has updated its STT-RAM roadmap with some ambitious efforts in mind: It hopes to replace DRAM, and eventually, NAND, with its next-generation MRAM
2010-07-02 MCUs pack USB, 96KB RAM for improved throughput
Microchip Technology has integrated USB for Embedded Host/Peripheral/On-the-Go and 96KB RAM into its latest microcontrollers to improve throughput and data buffering
2000-06-22 Synchronous and asynchronous FIFO designs
This application note describes RAM-based FIFO designs using the dual-port RAM in XC4000-Series devices. Synchronous designs with a common read/write clock are described, as well as asynchronous designs with independent read and write clocks
2000-06-27 Design migration from XC4000 to XC5200
This application note reviews the differences between the XC5200 and XC4000 families, recommends approaches for converting XC4000 designs to the XC5200 architecture, and provides a methodology to migrate designs easily in multiple CAE environments.
2012-11-06 Imec, Nantero to develop carbon nanotube NVM
Imec backs Nantero in research project aimed at producing carbon nanotube non-volatile memories smaller than 20nm as possible DRAM replacement.
2015-03-04 HyperRAM from Spansion touts up to 333MB/s read throughput
The HyperBus devices claims to offer fast boot, graphics display and real-time XIP applications, targeting SoCs and MCUs where both the flash and RAM are connected on the same 12-pin HyperBus interface
2005-03-16 Hope floats for new DRAM
A potentially revolutionary 90nm DRAM technology, claiming gains in speed, size and power consumption, has been developed by a Swiss startup.
2008-02-28 Freescale MRAM lifts off to space
MRAM products from Freescale Semiconductor have been selected for use in a magnetometer subsystem from Angstrom Aerospace, which will be launched into space on board the Japanese research satellite SpriteSat.
2012-10-17 Exploring split-gate thin-film storage
Based on nanocrystals, SG-TFS is touted to provide fast, efficient read/write operation in a reliable, economical and scalable technology.
2010-09-07 Elpida, Spansion cooperation moves closer to market
The companies claim that they have devised the industry's first charge-trapping 1.8V 4Gb single-level cell NAND flash memory.
2011-01-14 Delays hound IBM-Ramtron FRAM alliance
IBM has so far failed to honor its commitment to Ramtron to roll out FRAM semiconductor products from its Burlington, Vermont advanced wafer manufacturing facility in 2010, forcing Ramtron to design, sample and ship replacement products.
2014-07-11 8Gb DDR3 components double memory per chip
I'M has developed its own way to manufacture 8Gb DDR3 components with single chip-select utilising existing 30nm manufacturing technologies
2008-04-03 16bit MCUs tout 'lowest-power,' large memory
Microchip has added nine new members to its cost-effective PIC24F 16bit MCU family, which are said to consume the least power at 2.6?A standby and feature a large memory of up to 256Kbyte flash and 16Kbyte RAM
2015-05-11 Verilog-AMS vs SPICE view for DDR, LCD verification
In this instalment, we comparatively analyse the usage of both views from the perspective of DDR interfaces, LCD controllers and on-chip memories.
2014-07-17 Utilising ARM Cortex-M based SoCs (Part 1)
Learn how internal SoC peripherals, such as an op-amp, ADC, PWM, and most importantly a processor core, are used to develop a system with the least number of components on the PCB.
2015-10-05 Using 16nm FinFET as a resistive memory device
An IEDM paper is set to demonstrate that hafnium-dioxide high-k dielectric material, which is used in the high-k metal gate (HKMG) of a 16nm FinFET, can also be turned into a ReRAM device.
2015-06-01 Understanding HMI: Taking closer look at recent trends
Touch-enabled human machine interfaces offer a more intuitive means to operate electronics hardware, and are now at the forefront of it being used in a much wider scale.
2007-09-03 Tips for successful structured ASIC designs
The use of structured ASIC for custom IC design is an increasingly attractive option. This article provides useful tips for structured ASIC designs.
2015-06-15 The MCU guy's guide to FPGAs: Configuration
Embedded design engineers usually come from MCU background, so they often have only a vague idea as to what an FPGA is. In this article, we are going to look into configuration techniques and technologies.
2006-10-19 Teridian debuts industrial automation product line
Teridian Semiconductor has officially entered the industrial automation and control market with the introduction of 71M8100, a measurement controller designed for industrial applications.
2005-01-27 Synplicity upgrades FPGA synthesis
Synplicity released a new version of its Synplify Pro FPGA synthesis tool boasting major run time and quality of results improvements.
2013-02-06 Solving SoC and FPGA prototyping debug issues
Read about the accelerated development, verification and debugging of ASIC hardware and software.
2015-06-11 Smart glass taps AR to take on consumer, industrial apps
Emerging technologies like AR comes with a series of challenges and opportunities. Still, as additional use cases develop the possibilities are endless.
2008-12-12 Smart battery IC packs 16bit CPU core
Renesas Technology Corp. has released the R2J24020F Group of Li-ion battery packs with Smart Battery System (SBS) support.
2009-11-19 Serial flash delivers 320Mbit/s burst data rate
Silicon Storage Technology touts the fastest quad-bit serial flash memory, operating from 1.8V and capable of sustaining 320Mbit/s burst data rates.
2015-10-19 Renesas aims to streamline embedded dev't for IoT
Synergy helps automate the implementation of graphical interfaces, network connectivity and device configuration, and frees developers to focus on innovation in their core application competence.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top