Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > solution bridge

solution bridge Search results

?
?
total search412 articles
2008-10-16 EMC issues for hysteretic converters in LED driving
The use of LEDs in a wide range of lighting applications is rapidly increasing. In order to maximize the efficiency improvements that the LEDs offer they must be driven from switching regulators rather than power hungry linear circuits. One of the most versatile inductive switching topologies is the hysteretic converter. To ensure these converters are used effectively in a fully EMC compliant manner their limitations must be understood.
2015-04-13 Electronics industry: Generating revenue thru effective CRM
Today's customer relationship management system has gradually moved beyond its intended scope and function to now actually help generate revenue for companies.
2007-03-16 Electrical DFM promises gains in parametric yield
Design techniques are under greater pressure to provide equivalent scaling to enable the semiconductor road map to continue in a cost-effective way.
2003-11-12 EDA users call for better power, timing tools
Better timing and power tools are critically needed for ASIC and processor designs.
2013-01-11 Easing thermal management design, production
Thermal management, whether the end user is the military, aerospace industry or Silicon Valley, should entail extremely close association and planning at all stages.
2003-04-29 EarthLink deploys DQ Technology ADSL modems
EarthLink Inc. has selected DQ Technology Inc.'s VisionNet ADSL Modems to be deployed in its nationwide marketing of ADSL service.
2006-10-19 Driver ICs operate in extremely hot environs
Atmel's new driver ICs are designed using the company's high-voltage SMARTIS technology that enables up to 200C chip temperatures.
2008-07-16 Door zone devices improve car comfort, convenience
In modern vehicle doors, the control of various loads and functions is realized increasingly by using smart power semiconductor devices. The quantity of the functions to be controlled has been constantly increasing during the last few years, and different loads have been integrated inside the electronics.
2006-08-11 Digital audio amplification: a new approach
Now that virtually all audio source data is digital, we are compelled to re-examine the basic principals behind conventional amplification to see if it is adequate for today's digital source material.
2006-01-12 DFM tool helps prevent mask failure at 65nm and below
SIGMA-C Software's microlithography simulation/image verification tool enables the transfer of electronic designs unto printed wafers to help prevent mask failure at 65nm and below.
2005-09-09 Development kit makes good on digital design
Silicon Laboratories' development kit for its Si825x family of digital power controllers is a complete hardware and firmware development system that eliminates user-written software for implementing digital power supplies.
2014-04-11 Developing more efficient motor control designs
Read about software examples of motor control designs that employ C8051F3xx MCUs to illustrate their use in controlling various types of motors.
2013-02-20 Designing high-temperature differential amplifier
Here's a low cost and high performance design idea for dealing with current and next-generation control applications that require devices to function at temperatures greater than 200C.
2006-10-16 Designers weigh digital power trade-offs
Designers discuss the pro's and con's of analog and digital power control.
2005-10-11 Design, manufacturing worlds collide at Bacus
If there was a shred of doubt remaining about the magnitude at which IC design and manufacturing convergence is taking place, it was laid to rest last week (Oct. 3-7) at the 25th annual Bacus Photomask Technology symposium in Monterey, Calif.
2010-07-29 Design flow optimizes partial reconfiguration FPGAs
Xilinx releases a streamlined design flow for its FPGAs that support partial reconfiguration and offer on-site programming and re-programming.
2008-03-15 Design considerations for three-phase power factor correction
The need for the current waveform to track the voltage on a three-phase power system leads to a second set of requirements, in addition to those for a single-phase power factor correction system.
2015-12-21 Design concerns when choosing resonant LLC converters
Here is a look at the characteristics of a resonance LLC topology and, in particular, the potential failure mechanism of MOSFET devices during the functionality of the system.
2004-09-17 Cypress licenses Astro PCI Express PHY technology
Cypress Semiconductor Corp. has licensed Astro Semiconductor's PCI Express Physical Layer (PHY) technology.
2003-10-20 Current leakage tool could boost Transmeta's Efficeon
Transmeta Corp. has launched its second-generation x86-compatible notebook processor.
2016-01-07 Cost-effectively transition to brushless DC motors
Brush-type DC motor solutions can be replaced 1:1 by a BLDC motor system, that on the outside, look like a conventional motor but inside pro- vide all advantages needed to realise intelligent motion control.
2012-05-31 Cortina extends PON soln offerings
According to Cortina, the new products accelerate adoption in the fast growing 10G EPON and EPON/GPON markets.
2007-12-14 Controller delivers fastest handset download
Cypress Semiconductor says its peripheral controller delivered the fastest transfer of multimedia files from a PC to a mobile handset in a recent comparison by Semiconductor Insights.
2011-04-26 Control IC offers 88% efficiency
International Rectifier introduces the IRS2548D Switched Mode Power Supply (SMPS) control IC for energy efficient applications for high power LED illumination.
2007-10-10 Consortium formed to promote SOI technology
Nineteen industry manufacturers and suppliers have teamed up to launch the SOI Industry Consortium that aims to promote the benefits of SOI technology and reduce the barriers to its adoption into broad markets.
2008-05-16 Connection diagrams interfacing the MoBL-USBTM FX2LP18 to mobile handset applications and baseband processors
This application note from Cyoress provides connection diagrams that can be used as a guideline to develop schematics for high-speed USB designs containing common applications/baseband processors.
2005-02-16 Comms, consumer electronics lead tech trends
Mainland manufacturers eye on developing new products and solutions targeting communications and consumer devices.
2009-01-07 Coming soon: WLAN-powered supermarkets
Altierre Corp. offers a WLAN platform that helps a supermarket employee update prices throughout the store in a matter of minutes with a few keystrokes.
2008-02-12 Class G and charge-pump technologies maximize efficiency in boosted amplifiers
This application note describes the advantages of using charge-pump and Class G technologies to power loudspeakers.
2008-04-16 Class G amps key in driving ceramic speakers
Today's portable devices drive a need for smaller, thinner and more power-efficient electronic components. Cellphone form factors have become thin that the traditional dynamic speaker has become the limiting factor in how thin manufacturers can make their handsets. Ceramic or piezoelectric speakers are quickly becoming a viable alternative to dynamic speakers.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

?
?
Back to Top