Global Sources
EE Times-Asia
Stay in touch with EE Times Asia
EE Times-Asia > Advanced Search > terminations

terminations What is residual block termination (RBT)? Search results

What is residual block termination (RBT)?
In cryptography, residual block termination RBT) is a variation of cipher block chaining mode (CBC) that does not require any padding. It does this by effectively changing to cipher feedback mode for one block. The cost is the increased complexity.
total search299 articles
2002-03-01 Darfon chip capacitors suit high-speed circuits
The company's 0508 and 0612 low-inductance chip capacitors feature an X7R dielectric and are designed for use in high-speed circuits such as microprocessor decoupling in computers and servers.
2003-02-18 Current-sensing chip resistor rolls
State of the Art Inc.'s true, full-Kelvin four-terminal low-value chip resistors target current-sensing apps.
2006-03-13 Current sense resistors achieve higher power ratings
TT electronics IRC Wirewound and Film Technologies Division has developed a surface-mount current sense resistor with extended power ratings up to 5W.
2007-05-09 Cross-over jumper resistors suit consumer appliances
IRC's cross-over jumper resistors deliver features that make them suitable for power supply and power audio amplifier circuts, including those in consumer appliances.
2005-10-18 CPA targets BPON, GPON apps
Maxim Integrated Products rolled out what it touts as the industry's first burst-mode clock-phase aligner (CPA) for BPON and GPON applications.
2005-11-02 Contacts target hi-rel interface apps
Samtec's Tiger Eye contacts are heat-treated to optimize spring properties for maximum cycles in high-reliability applications.
2007-06-22 Connectors stack up for increased functionality
One of the challenges faced by design engineers of electronic equipment is how to manage the tangle of individual wires that provide power and control signals for various system functions.
2010-04-22 Connectors handle high signal density apps
FCI has extended its D-sub high-density series to include right-angle male, straight male and female, solder bucket male and female, and crimp male and female versions.
2005-05-25 Connectors enable port selection in hard disk drive carriers
FCI has developed a line of 29-position SAS plug and receptacle connectors, and 22-position SATA receptacle connectors for port selector assemblies in removable HDD carriers used in enterprise servers and storage systems.
2005-07-18 Connector suits AdvancedTCA
Tyco's new power connector is said to combine very high conductivity materials with precision formed selectively-plated contacts to produce high-current carrying capability while keeping costs at a minimum.
2015-06-23 Comparing position sensors for hydraulic cylinder feedback
Know the strengths and weaknesses of magnetostrictive, variable resistance, and variable inductance sensors for hydraulic or pneumatic cylinders.
2008-09-08 Compact connectors allow multiple mounting
Wago Corp. has expanded the 222 Series LEVER-NUTS compact splicing connector family with three components for multiple mounting and strain relief configurations.
2008-08-20 Compact capacitors deliver volumetric efficiency
Vishay has expanded its 298D series of MicroTan solid tantalum chip capacitors giving an industry-best capacitance-voltage rating in the molded 0402 package size. These capacitors represent a major innovation in volumetric efficiency.
2009-07-09 Compact 5W resistor suits automotives
Vishay Intertechnology Inc. is expanding its WSR series of power metal strip resistors with the introduction of the WSR5. It is touted as the industry's first power metal strip resistor device to offer a 5W power rating in a 4527 package.
2010-04-28 Coax cable assembly offers up to 240 contacts
Samtec's SEARAY coax cable assembly (SEAC) series offers 180 or 240 contacts (six or eight rows, 30 positions per row) on .050-inch (1.27mm) pitch.
2009-06-22 CMOS analog muxes consume low power
Vishay has released two muxes that are optimized for 15V high-precision, low-noise signal switching in data acquisition, industry process control, test and measurement, and medical systems.
2005-01-11 CIT launches new DIP switch lines
CIT Relay & Switch has developed two new series of DIP switches. These are the low-profile KL series with a 6.3mm height and the KJ series.
2008-12-18 Circular connectors geared for high pressure systems
ITT Interconnect Solutions has developed a series of miniature circular connectors designed to withstand high pressure environments.
2006-08-10 Chipset suit IP telephony, modem, line monitoring apps
The new chipset from Integration Associates is voice and V.92 capable and is suitable for telephone line interface requirements and standards.
2006-11-14 Chip resistors withstand high-sulfur conditions
Stackpole Electronics has introduced a new SMD chip resistor series that operates under high-sulfur conditions primarily found in automotive and industrial applications.
2007-09-11 Chip resistors offer high power in small package
Designated the LRF3W series, the new chip resistors from TT electronics IRC Advanced Film Division are offered in a package size traditionally rated at 1W.
2008-06-20 Chip resistors guarantee robustness
Providing design engineers with a robust device ideal for a variety of high voltage, harsh environment applications, TT electronics IRC now offers a thick film chip resistor with resistance values to 100M?.
2008-05-13 Chip resistor offers high stability in harsh setups
TT electronics IRC has developed a 0402 chip resistor constructed on TaNFilm thin-film resistive element for long life and high stability in harsh environments.
2005-09-19 Chip resistor doubles voltage rating
State of the Art Inc. has introduced a new 0203 size chip resistor on alumina that offers double the voltage rating, from 15V to 30V, as compared with the existing 0302 chip resistor.
2007-09-03 Checking signals on high-density FPGA boards
On a high-density FPGA-based board where multiple FPGAs are interconnected with hundreds of signals, checking and validating the interconnections between the FPGAs becomes a very challenging task.
2007-06-01 Check interconnections between FPGAs on a high-density board
This article describes a simple, effective and generic solution to check signal connectivity between FPGAs on a high density prototyping board with multiple FPGAs and hundreds of signals.
2006-08-11 Ceramic capacitors with reduced board mounting area
AVX has introduced a new single-layer ceramic capacitor series that features X7R characteristics and a dielectric constant of 60,000.
2008-08-05 Ceramic capacitors come in large case sizes
Kemet Corp. has expanded its HiCV C0G multilayer ceramic capacitor (MLCC) surface-mount product portfolio in large case 1812 and 2220 sizes.
2008-04-29 Cat 6 RJ45 connector now in shielded version
Bomar Interconnect Products, Inc. has added a shielded version of its Category 6 EZ-RJ45 (P/N 300668SEZ) connector and a snagless boot (P/N CBX600EZ) to it EZ series of connectors.
2006-06-30 Card-edge connectors target power apps
FCI has developed a low-cost Power Card-Edge connector series that can be used for DC power output from embedded AC/DC power supplies.
Bloggers Say

Bloggers Say

See what engineers like you are posting on our pages.

Back to Top